DDC Pump for PC Water Cooling, Bykski CP-PMD3COV-X PWM, G1/4

Bykski · CP-PMD3COV-X

PWM DDC pump for custom PC water cooling

The Bykski CP-PMD3COV-X is a standalone DDC pump that circulates coolant in a custom PC water cooling loop. A separate PWM lead lets you adjust pump speed. Choose a clear acrylic top with addressable lighting or a black POM top for a build without lighting.

Fits
G1/4 fittings
Max head
6 m
Pump power
12V DC
Footprint
70 × 70 mm

Fittings & Connections

  • ✓G1/4 fittings for the inlet and outlet
  • ✓4-pin peripheral Molex connector from the power supply for pump power
  • ✓4-pin PWM fan header for speed control and RPM feedback
  • ✓5V 3-pin ARGB header for lighting on the acrylic version

Not compatible:

  • ✗12V 4-pin RGB headers for the acrylic version’s 5V lighting

Design Highlights

Clear acrylic top with 5V ARGB

Choose the acrylic version if you want addressable lighting through the clear pump top. It uses a separate 5V 3-pin ARGB connection.

Black POM top without lighting

The POM version has a solid black pump top and comes without lighting. It uses the same separate pump power and PWM connections.

Finned aluminum housing

The pump comes with its aluminum armor installed. Fins on the outside of the housing help dissipate heat from the pump.

Key Specifications

ModelCP-PMD3COV-X
Pump typeDDC with PWM speed control
Dimensions (W × D × H)70 × 70 × 63 mm
Inlet and outlet threadG1/4
Maximum head6 m
Pump power12V DC via 4-pin peripheral Molex
Speed control and feedbackSeparate 4-pin fan connector for PWM control and RPM feedback
Pump top and lightingClear PMMA acrylic with 5V 3-pin ARGB, or black POM without lighting
Outer housingAluminum alloy

Bykski’s pump body drawing. Measurements are in millimeters.

Which Version Do I Need?

Choose based on whether you already have a reservoir for your loop.

CP-PMD3COV-X pumpTHIS PAGE
Choose the standalone pump if you already have a reservoir or want to select one separately.
Select a reservoir size to order the pump and reservoir together.

What's in the Box

1 × DDC pump with aluminum housing installed

Installation & Use

1
Check clearance for the pump, fittings, and tubing, then secure the pump. Bykski shows the optional B-BKT-105 bracket for radiator mounting.
2
Fit the G1/4 fittings and route the tubing so the reservoir feeds the pump inlet and the pump outlet feeds the rest of the loop.
3
Connect the pump’s Molex lead to the power supply and its separate PWM lead to a 4-pin fan header. For the acrylic version, use a 5V 3-pin ARGB connection with a matching adapter where needed.
4
Fill the reservoir and prime the pump before applying power. For the leak test, power only the pump, check the fittings, and top up the reservoir as air clears.

You also need a reservoir, G1/4 fittings matched to your tubing, coolant, a radiator, and the water blocks for your build.

Bykski’s drawing shows how the pump attaches to the optional B-BKT-105 bracket.

FAQ

Does the DDC pump come with a reservoir?

This listing is for the pump only. The acrylic pump top can also take a compatible reservoir tube and cap if you want to combine them later.

Which port is the inlet on the acrylic top?

The center port on top is the inlet. The side port is the outlet. Both take G1/4 fittings.

Does the PWM header power the pump?

The 4-pin peripheral Molex lead supplies pump power. The separate 4-pin fan lead carries the PWM control and RPM feedback signals.

Which pump version has ARGB?

The clear acrylic version uses a 5V 3-pin ARGB connection. The black POM version comes without lighting.

How much room does the pump need?

The pump body measures 70 mm wide, 70 mm deep, and 63 mm tall. Allow additional room for your fittings, tubing, and mounting hardware.

Notes
  • Keep the pump primed whenever it is powered.