Bykski · B-MRCOV-X-V2
DDR5 RAM cooling armor for one DIMM
The Bykski B-MRCOV-X-V2 is a black aluminum heat spreader for one desktop DDR5 DIMM. Two plates fit around the memory module, with thermal pads between the plates and the module. The top provides a mounting surface for a compatible Bykski RAM water block, which carries heat into a custom liquid cooling loop.
Finish
Black anodized aluminum
Coverage per set
Fits 1 DDR5 DIMM
Compatibility
Fits desktop DDR5 DIMMs. Bykski lists these RAM water blocks for the spreader.
- ✓Bykski B-RAM-X-V2
- ✓Bykski B-RAM-X-V4
- ✓Bykski B-RAM-D2-X
- ✓Bykski B-RAM-D4-X
Not compatible:
Before ordering, check your memory generation and match the full water-block model number.
Example desktop DDR5 DIMM from the compatibility guide.
Design Highlights
Two plates around one DIMM
The screws hold the two aluminum plates together. Thermal pads sit between the plates and the memory module to transfer heat.
Installed example showing several DIMMs, each with its own spreader.
Top mounting holes for a water block
A compatible Bykski RAM water block mounts above the spreaders. Each DIMM uses its own spreader set.
Key Specifications
| Model (SKU) | B-MRCOV-X-V2 |
|---|
| Memory type | Desktop DDR5 DIMM |
|---|
| Material and finish | Black anodized aluminum |
|---|
| Spreader length × height | 134 × 34.5 mm |
|---|
| Top mounting edge width | 7.58 mm |
|---|
| Coverage per set | 1 DIMM |
|---|
Which Version Do I Need?
Pick the heat spreader, matching water block, or integrated assembly based on the parts you need.
Bykski B-MRCOV-X-V2THIS PAGE
Choose one set per DDR5 DIMM if you have a compatible RAM water block or plan to buy one separately.
Choose this compatible water block to mount above the B-MRCOV-X-V2 spreader in your custom loop.
Choose this assembly if you want an integrated RAM water block and heat spreader.
What's in the Box
1 × two-piece heat spreader2 × thermal padsMounting screws
Installation & Use
1Power off the PC and remove the DIMM. Start with a bare desktop DDR5 module.
2Check whether the module has chips on one side or both. Choose pads that make contact with the plates without forcing the assembly closed.
3Place the thermal pads between the module and the plates. Align the two plates around the module and secure them with the mounting screws.
4Seat the DIMM in its slot. Follow the water block’s instructions to mount it over the spreader and connect it to your loop.
For liquid cooling, have a compatible RAM water block and the fittings for that block. Both are sold separately.
FAQ
How many RAM sticks does one set cover?
One set covers one DDR5 DIMM. Order one set for each stick you want to fit.
Does this heat spreader fit DDR4 RAM?
The B-MRCOV-X-V2 fits desktop DDR5 DIMMs only.
Does the B-RAM-X-V4 water block fit?
Yes. Bykski lists the B-RAM-X-V4 as compatible, and the water block is sold separately.
Do I get thermal pads with the heat spreader?
The set includes two thermal pads. Check pad contact and clearance for your module’s layout before securing the plates.
Notes- Warning: This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.