Description
The Bykski B-RAM-X-V4 is a RAM water block for custom PC liquid-cooling loops. It mounts over up to four DIMMs fitted with compatible Bykski heat spreaders and transfers heat from the spreaders into the coolant through a copper cold plate. The block is available in black or silver with 5V addressable RGB lighting.
Each DIMM needs a matching Bykski heat spreader.
Not compatible:
Before ordering, check the spreader model, DIMM slot layout, and clearance above the memory for fittings and tubing.
The plated T2 copper cold plate sits against the heat spreaders. Coolant flowing through the block carries heat away from the memory.
The ARGB lighting illuminates the clear acrylic. Use a compatible 5V controller or a matching adapter for a 5V 3-pin motherboard header.
Both finishes use an acrylic top with an aluminum alloy trim plate. The two G1/4 ports face up for tubing connections.
| Model | B-RAM-X-V4 |
|---|---|
| Capacity | Up to 4 DIMMs with compatible heat spreaders |
| Cold plate | Plated T2 copper |
| Top and trim | Acrylic top and aluminum alloy trim |
| Dimensions (L × W × H) | 133 × 48 × 20 mm |
| Ports | 2 × G1/4 |
| Port center spacing | 74 mm |
| Mounting slot center spacing | 110.20 mm |
| Lighting | 5V 3-pin ARGB (Bykski RBW) |
| Finish | Black or silver |
Memory heat spreaders and the lighting controller are sold separately.
You also need matching heat spreaders, G1/4 fittings, tubing, and a custom loop with a pump, radiator, and coolant.
Yes. Use one Bykski B-MRCOV-X-V2 heat spreader per DDR5 DIMM. The spreaders are sold separately.
One block can cool up to four DIMMs fitted with compatible Bykski heat spreaders. Check your motherboard's DIMM slot layout before ordering.
Both ports take G1/4 fittings. Choose fittings that match your tubing.
Use a compatible 5V 3-pin ARGB connection. A 12V 4-pin RGB header can damage the lighting.