9%OFF

Cougar Conquer Distro Plate | Bykski RGV-CG-ZFZ-P

$500.23 $550.00 now set
items available
View Details
Bykski · RGV-CG-ZFZ-P

Water cooling distro plate for the Cougar Conquer

The Bykski RGV-CG-ZFZ-P distro plate is for building a custom hard-tube water cooling loop in the original Cougar Conquer. Its clear acrylic channels give the water blocks and radiators a common place to connect, and the plate has a mount for a DDC pump. Bykski’s reference build uses a top 360 mm radiator and a front 240 mm radiator.

Fits
Cougar Conquer
Plate ports
G1/4
Hard tube size
14 mm OD
Lighting
5V 3-pin ARGB

Compatibility

Check the model on your Cougar case before ordering.

  • ✓Cougar Conquer (original model, CGR-5LMRO)

The Conquer 2 uses a different distro plate.

Confirm your CPU socket before choosing a CPU water block. If you need a GPU water block, give us the exact graphics card model and PCB revision so we can check fit.

Bykski installation example in the original Cougar Conquer.

Design Highlights

Coolant routing through the plate

Channels in the clear acrylic plate route coolant between the water blocks and radiators. The DDC pump mounts to the plate, and the adjustment module helps line up the tubing at the CPU block.

5V addressable lighting

The acrylic lets the LEDs light up the plate. Use a matching 5V ARGB controller or connect to a 5V 3-pin motherboard header with the included adapter cable.

Key Specifications

Distro plate modelRGV-CG-ZFZ-P
Plate materialClear acrylic (PMMA)
Distro plate portsG1/4
Pump mountDDC
Hard tubing14 mm outside diameter
Reference build radiators360 mm top and 240 mm front
Reference build fans5 × 120 mm
Lighting5V 3-pin ARGB (Bykski RBW)

Which Version Do I Need?

Choose the distro plate or kit that matches the name on your case.

Cougar ConquerTHIS PAGE
Choose this distro plate for the original Conquer chassis.
Choose the RGV-CG-PR-G-P kit for the Panzer G chassis.
Choose the RGV-CG-Panzer Evo-P kit for the Panzer Evo chassis.

What's in the Box

1 × distro plate with ARGB lighting and mounting hardwareAdjustment module5V 3-pin ARGB motherboard adapter cable

A DDC pump is optional. Contact us before ordering to confirm the pump configuration. Source the remaining loop components separately.

Supply your own coolant. The case, motherboard, and RAM blocks in the build photos are for illustration.

Installation & Use

1
With the PC powered off and unplugged, seat the pump seal and secure the DDC pump to the plate as shown in the Bykski guide.
2
Align the plate with the case mounting holes and use the supplied mounting hardware. Mount the top and front radiators, fans, and the water blocks matched to your hardware.
3
Measure, cut, and deburr the hard tubes. Follow Bykski’s port diagram to connect the plate, radiators, and water blocks.
4
Connect the lighting to a compatible 5V ARGB controller. For motherboard sync, use the included adapter cable with the 5V 3-pin ARGB header. Keep the 5V lighting lead off any 12V 4-pin RGB header.
5
Fill the loop before running the pump. Bleed trapped air and check every joint for leaks with the rest of the PC unpowered.

Have compatible PC coolant and tools for cutting and deburring hard tubing. Use hard-tube bending tools where your route requires bends.

Bykski’s chassis mounting diagram.

FAQ

Does this distro plate fit the Cougar Conquer 2?

The RGV-CG-ZFZ-P fits the original Cougar Conquer (CGR-5LMRO). Bykski makes a different plate for the Conquer 2.

Does the distro plate come with a pump?

A DDC pump is optional. Contact us before ordering to confirm whether your configuration includes one.

What size tubing and fittings go with the plate?

Use hard-tube fittings sized for 14 mm outside-diameter tubing. The threaded ports on the plate are G1/4.

How do I confirm a GPU block for my build?

Before ordering a GPU water block, send us your exact card model and PCB revision to check whether a matching block is available.

Can I use a 12V RGB header for the lighting?

Use the included adapter cable with a 5V 3-pin ARGB header, or use a matching 5V controller. The 12V 4-pin RGB header uses a different voltage.

Notes
  • This distro is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
  • The program kit, which only include the products in the corresponding program kit list. The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display. The kit's actual installation results will vary depending on progarm and case, builder ideas, etc.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc., If not notified in time, the Bykski's latest real object and the newest list shall prevail