In Win 805 Distro Plate with DDC Pump, Bykski RGV-INW-805-DPC

Bykski · RGV-INW-805-DPC

In Win 805 distro plate with DDC pump

The Bykski RGV-INW-805-DPC is an acrylic coolant distribution plate for the In Win 805 case. Its built-in channels route coolant between the CPU block, a single GPU block, and the radiator in a custom loop. The plate comes with a preinstalled DDC pump and a heat-dissipation cover.

Fits
In Win 805
Port thread
G1/4
Lighting
5 V 3-pin ARGB

Compatibility

  • ✓In Win 805 case

Check the case model before ordering. The plate is designed for a single-GPU loop.

Key Specifications

Model (SKU)RGV-INW-805-DPC
Plate dimensions (L × W × T)430.3 × 145 × 30 mm (plate only)
MaterialsAcrylic body and aluminum mounting plate
Port threadG1/4
PumpPreinstalled Bykski DDC pump with heat-dissipation cover
LightingBykski RBW 5 V 3-pin addressable RGB

Which Version Do I Need?

Bykski RGV-INW-805-DPCTHIS PAGE
Choose the plate with a covered pump if you are selecting the other parts of your loop separately.
Choose the kit if you want a bundle for an AMD or Intel CPU build.

Product Photos

What's in the Box

Distro plate with preinstalled DDC pump and coverAdapter cable for a motherboard 5 V 3-pin ARGB header

A lighting controller is sold separately.

Installation & Use

1
Mount the plate in the In Win 805 using the screw points on its aluminum mounting plate.
2
Connect the CPU block, GPU block, and radiator to the distro plate with G1/4 fittings and matching tubing.
3
For motherboard lighting control, use the included adapter cable to connect the lighting to a matching 5 V 3-pin ARGB header.
4
Fill the loop’s reservoir with coolant, then power only the pump. As the level drops, stop the pump and top up before the reservoir runs dry. Check each connection for leaks before powering the rest of the system.

For the rest of the loop, supply the CPU and GPU blocks, radiator, fittings, tubing, and coolant.

FAQ

Is the pump already installed?

Yes. This configuration comes with a preinstalled Bykski DDC pump and a heat-dissipation cover.

Can I use the lighting with a motherboard header?

Use the included adapter cable with a matching 5 V 3-pin ARGB header. Never connect the lighting to a 12 V 4-pin RGB header. A separate lighting controller is not included.

Notes
  • The covered DDC pump is included. The case and other loop components shown in the product photos are for reference.
  • Please pay attention to this product is only compatible with corresponding case, may not be compatible with other cases.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc., If not notified in time, the Bykski's latest real object shall prevail