30%OFF

InWin 905 Distro Plate for Single-GPU Loops, Bykski RGV-INW-905-P

$125.43 $180.00 now piece
items available
View Details
Bykski · RGV-INW-905-P

Distro plate for the InWin 905

The Bykski RGV-INW-905-P is an acrylic distribution plate for a custom liquid-cooling loop in the InWin 905 case. Its channels route coolant between a separate CPU block, a single GPU block, and the radiator. Choose the No Pump option if you have a compatible Bykski DDC pump, or select Pump With Cover for a preinstalled pump.

Fits
InWin 905
Ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

  • ✓InWin 905 case

Check the exact case model before ordering. This plate supports single-GPU loops only.

Key Specifications

ModelRGV-INW-905-P
MaterialAcrylic plate with aluminum mounting plate
Plate length × width330 × 125 mm
Port threadG1/4
Pump mountCompatible Bykski DDC pump
Lighting5V 3-pin ARGB (Bykski RBW)

Which Version Do I Need?

RGV-INW-905-P distro plateTHIS PAGE
Choose the plate if you are sourcing the other loop parts yourself. Select No Pump or Pump With Cover.
Choose the kit if you want the plate bundled with loop components. Select the AMD CPU or Intel CPU option.

What's in the Box

Distro plate5V 3-pin ARGB adapter cableMounting screwsHex wrenchManual

The Pump With Cover option adds a preinstalled pump with a heat-dissipation cover.

Installation & Use

1
For the No Pump option, confirm your Bykski DDC pump model before fitting it to the plate.
2
Position the distro plate in the case and fasten it using the aluminum mounting plate.
3
Connect the CPU block, GPU block, and radiator to the plate with tubing and G1/4 fittings.
4
Fill the loop and check for leaks before powering the PC hardware.

Have your CPU and GPU blocks, radiator, fittings, tubing, and coolant ready.

FAQ

Which case does this distro plate fit?

It is designed for the InWin 905 case and a custom loop with one GPU block.

Does the distro plate come with a pump?

Select Pump With Cover for a preinstalled pump and cover. Select No Pump if you are supplying your own compatible Bykski DDC pump.

Which header does the lighting use?

For motherboard lighting control, use the included adapter cable to connect the distro plate to a 5V 3-pin ARGB header. Never connect it to a 12V 4-pin RGB header. Supply your own lighting controller if needed.

Notes
  • All pumps, radiators, reservoirs, cases, fittings, and other products in details photos are for reference only.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc., If not notified in time, the Bykski's latest real object shall prevail
Product photo

Reverse side