Bykski · RGV-INW-Alice-P
InWin Alice distro plate
The Bykski RGV-INW-Alice-P is an acrylic distribution plate for a custom liquid cooling loop in the InWin Alice. In Bykski’s example loop, its channels bring the tubing from the CPU block, GPU block, and radiator to one panel. The plate uses G1/4 fittings and has a built-in DDC pump mount.
Compatibility
Bykski’s illustrated layout uses one GPU block.
Check your case model before ordering.
Key Specifications
| Model | RGV-INW-Alice-P |
|---|
| Material | Acrylic plate with aluminum mounting backplate |
|---|
| Plate length × width | 377.7 × 126.0 mm |
|---|
| Port thread | G1/4 |
|---|
| Pump mount | DDC |
|---|
| Lighting | 5V 3-pin addressable RGB (Bykski RBW) |
|---|
Which Version Do I Need?
Distro plateTHIS PAGE
Choose this plate if you’re sourcing the rest of your loop separately. Select No Pump or Pump With Cover.
Choose the kit if you want the same plate bundled with loop components. Select the kit for your Intel or AMD CPU platform.
What's in the Box
Distro plateMounting hardware5V 3-pin motherboard ARGB adapter cable
The Pump With Cover option includes a covered pump. A lighting controller is sold separately.
Installation & Use
1For the No Pump option, fit a compatible DDC pump to the plate.
2Position the plate in the case and fasten the screws into the aluminum mounting backplate.
3Connect your loop with G1/4 fittings. For motherboard lighting control, use the included adapter cable to connect the plate’s RBW lighting to a 5V 3-pin ARGB header. For standalone control, use a controller that accepts the Bykski 5V RBW plug. Do not connect the lighting to a 12V 4-pin RGB header.
4Fill the loop and leak-test it with the rest of the system unpowered. Keep the pump supplied with coolant during the test.
For the illustrated loop, source the CPU and GPU blocks, radiator, fittings, tubing, and coolant separately.
FAQ
Does the pump come with the plate?
Select Pump With Cover for a covered pump. The No Pump option requires a separately sourced compatible DDC pump.
Which lighting header should I use?
Use the included adapter cable to connect the plate’s RBW lighting to a 5V 3-pin ARGB header on your motherboard. For standalone control, use a controller that accepts the Bykski 5V RBW plug. Do not connect to a 12V 4-pin RGB header.
Product photo
Notes- All pumps, radiators, reservoirs, cases, fittings, and other products in details photos are for reference only.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc.,
If not notified in time, the Bykski's latest real object shall prevail