Lian Li PC-O11 Dynamic Distro Plate | Bykski RGV-LAN-O11-P

Bykski · RGV-LAN-O11-P

Lian Li O11 Dynamic Distro Plate

The Bykski RGV-LAN-O11-P is a clear acrylic distribution plate for a custom water-cooling loop in the Lian Li PC-O11 Dynamic. It mounts beside the motherboard tray and combines a coolant reservoir with built-in channels that route coolant between loop components. Choose the version with a covered DDC pump or supply your own compatible DDC pump.

Fits
Lian Li PC-O11 Dynamic
Ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Check your exact case model before ordering.

  • ✓Lian Li PC-O11 Dynamic

Measure radiator and fan clearance in your planned layout before choosing the radiator.

Key Specifications

ModelRGV-LAN-O11-P
Plate materialClear PMMA acrylic
Plate dimensions (L × W × T)346.16 × 132.49 × 33.50 mm
Port threadG1/4
Pump mountDDC
Lighting5V 3-pin addressable RGB (Bykski RBW)

Shown with the optional DDC pump and heat dissipation cover.

Which Version Do I Need?

RGV-LAN-O11-P distro plateTHIS PAGE
Choose this plate for a motherboard-tray-side mount when sourcing the rest of your loop separately.
Choose the separate kit listing if you want a kit built around this same plate.
Choose this model if you want the distro plate to mount at the front of the O11 Dynamic.

What's in the Box

1 × distro plateMounting hardwarePreinstalled ARGB LED stripLighting sync cable

Choose “Pump with heat dissipation cover” for the installed DDC pump and cover. Choose “No Pump” if you’re providing your own compatible DDC pump.

Installation & Use

1
If you chose No Pump, install a compatible DDC pump on the plate before mounting it.
2
Position the plate beside the motherboard tray and fasten it to the case using the metal mounting points on the back of the plate.
3
Connect the loop with G1/4 fittings and seal the unused ports.
4
Use the sync cable to connect the lighting to a 5V 3-pin ARGB header.
5
Fill the loop before running the pump. Leak-test with only the pump powered before turning on the rest of the PC.

For the rest of the loop, plan for water blocks, a radiator, tubing, matching G1/4 fittings, stop plugs, and coolant.

Example of the plate installed in an O11 Dynamic custom loop.

FAQ

Do I need a separate reservoir?

The plate has a built-in reservoir for the loop.

Which pump option should I choose?

Choose Pump with heat dissipation cover for a DDC pump fitted to the plate. Choose No Pump if you already have or plan to buy a compatible DDC pump.

Can I connect the lighting to a 12V RGB header?

Use a 5V 3-pin ARGB header. A 12V 4-pin RGB header is incompatible. A separate lighting controller is optional and sold separately.

Notes
  • The covered DDC pump is included only with the ‘Pump with heat dissipation cover’ option. The case, radiator, water blocks, tubing and fittings shown in the example build are for illustration only.