9%OFF

Lian Li O11 Dynamic Distro Plate Kit – Bykski RGV-LAN-O11-P

Bykski · RGV-LAN-O11-P

Lian Li O11 Dynamic distro plate kit

This Bykski custom water-cooling kit is built around the RGV-LAN-O11-P distribution plate for the original Lian Li PC-O11 Dynamic. The clear acrylic plate mounts beside the motherboard tray and uses built-in channels to route coolant between the water blocks and radiator. Its G1/4 ports connect to the rest of the loop.

Fits
Lian Li PC-O11 Dynamic
Port thread
G1/4
Lighting
5V 3-pin ARGB

Compatibility

The plate mounts beside the motherboard tray in this case:

  • ✓Lian Li PC-O11 Dynamic (original)

Check the full model name on your case before ordering.

Bykski’s example build shows how the tubing connects to the plate.

Key Specifications

Distro plate modelRGV-LAN-O11-P
Plate materialClear PMMA acrylic
Plate dimensions (L × W × T)346.16 × 132.49 × 33.50 mm
Plate port threadG1/4
Plate pump mountDDC
Plate lighting5V 3-pin addressable RGB (Bykski RBW)

Which Version Do I Need?

RGV-LAN-O11-P water-cooling kitTHIS PAGE
Choose this listing for the custom loop kit. After ordering, share your CPU and graphics card models so we can match the water blocks.
Choose the same plate for a loop you’re putting together yourself. Available without a pump or with a covered DDC pump.
Choose this plate if you want a front-mounted layout in the original O11 Dynamic. The listed version has a pump with a cover.

What's in the Box

1 × RGV-LAN-O11-P distribution plate with reservoirPump for the distro plateReservoir mounting bracket1 × 360 mm copper radiator with mounting screwsPWM ARGB fans with mounting screwsCPU water block with motherboard backplate1 × GPU water block6 × pre-bent acrylic hard tubes14 mm hard-tube compression fittings6 × 90° rotary fittings2 × 10 mm extension fittings2 × 25 mm extension fittings2 × 40 mm extension fittings1 × telescoping valve1 × air vent valveARGB lighting controllerMotherboard 5V 3-pin ARGB adapter cable

After ordering, contact us with your exact CPU and graphics card models. We’ll match the CPU water block to your CPU platform and the GPU water block to your graphics card.

Installation & Use

1
Mount the distro plate beside the motherboard tray. Thread the mounting screws into the metal backing plate.
2
Connect the loop with G1/4 fittings and seal any unused ports.
3
Fill the loop with your own coolant. Keep coolant in the pump and power only the pump to check for leaks before powering the rest of the system.

FAQ

Which O11 case does the kit fit?

The distro plate fits the original Lian Li PC-O11 Dynamic only.

Which motherboard header does the plate lighting use?

Use the included adapter cable to connect the plate lighting to a 5V 3-pin ARGB header. Never connect the plate lighting to a 12V 4-pin RGB header.

Do I need to buy coolant separately?

Yes. Supply your own coolant to fill the loop.

Notes
  • This distro plate kit, which only include the products in the corresponding kit list.
  • The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display.
  • The kit's actual installation results will vary depending on progarm and case, builder ideas, etc.
  • This kit does not contain any coolant. Due to strict restrictions on transport liquids.
  • Please contact the seller and provide the specific info of your graphics card and CPU. We will arrange the corresponding blocks for you
  • By making up the price difference, you can specify and replace or remove the products in the kit.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc..

    If not notified in time, the Bykski's latest real object and the newest list shall prevail.