Phanteks Evolv Shift X (PH-ES217XE) Distro Plate – Bykski RGV-PHA-217, Optional DDC Pump

$105.41 piece
items available
View Details
Bykski · RGV-PHA-217

Phanteks Evolv Shift X distro plate

The Bykski RGV-PHA-217 is a coolant distribution plate for a single-GPU custom loop in the Phanteks Enthoo Evolv Shift X. Its built-in channels route coolant between the loop components through G1/4 connections. Choose No Pump if you plan to supply a compatible pump, or Pump With Cover for a preinstalled DDC pump.

Fits
Phanteks PH-ES217XE
Ports
G1/4
Loop
Single-GPU

Compatibility

Case fit

  • ✓Phanteks Enthoo Evolv Shift X (PH-ES217XE)

Designed for this case only. Check the case model code before ordering.

Key Specifications

Board modelRGV-PHA-217-P
Store SKUsRGV-PHA-217 / RGV-PHA-217_DPC
MaterialAcrylic (PMMA) with an aluminum backplate
Plate body (L × W × T)305 × 155 × 19 mm
Port threadG1/4
Pump optionsNo Pump / preinstalled DDC pump with heatsink cover

Which Version Do I Need?

RGV-PHA-217 distro plateTHIS PAGE
Choose this listing if you’re sourcing your own loop components. Select No Pump or Pump With Cover.
Choose the separate kit if you want a bundle with an AMD CPU or Intel CPU option.
Reverse side of the plate. Pump With Cover shown.

What's in the Box

1 × distro plateMounting hardware

Pump With Cover includes the preinstalled DDC pump and its heatsink cover. No Pump requires a separately sourced compatible pump.

Installation & Use

1
Check the case model and plan the tubing runs between the plate, the water blocks and the radiator.
2
Secure the distro plate in the case. For No Pump, confirm the fit of your Bykski DDC pump before mounting it.
3
Connect the loop with G1/4 fittings and tubing.
4
Fill the loop and check for leaks before powering the rest of the PC.

To complete the loop, supply the water blocks, radiator, fittings, tubing and coolant.

FAQ

Does the distro plate come with a pump?

Select Pump With Cover for a preinstalled DDC pump with a heatsink cover. Select No Pump if you’re supplying a compatible Bykski DDC pump.

What fittings fit the plate?

Use G1/4 fittings on the distro plate.

What should I check before connecting lighting?

If you use lighting, match the connector’s voltage and pin count to the header before plugging it in.

Notes
  • System photos show an example build. Pump With Cover includes a preinstalled DDC pump with a heatsink cover. No Pump includes the distro plate without a pump.