Water Cooling Quick Disconnect with Two-Way Shutoff – Bykski CC-UQD

Bykski · CC-UQD

Water Cooling Quick Disconnect with Two-Way Shutoff

The Bykski CC-UQD is a stainless steel quick connector for liquid cooling loops that need a removable line connection. The male plug and female socket let coolant flow when coupled and shut off both sides when separated. Choose the version that matches the connections on both sides of your loop.

Fits
Threaded ports or soft tubing, by version
Housing
316L stainless steel
Shutoff
Both sides close on disconnect

Fits / Use With

Match both ends of the coupling to your loop.

  • ✓CC-UQD2-X · G1/8 external thread and a barb for 1/4 in. ID soft tubing
  • ✓CC-UQD4-X · Externally threaded end and a soft-tubing barb
  • ✓CC-UQD4D-X · G1/4 threaded connections at both ends
  • ✓CC-UQD6-X · Externally threaded end and a barb for 1/2 in. ID soft tubing

Before ordering, confirm the port thread and, for barbed versions, the hose inside diameter for the model you need.

Design Highlights

CC-UQD2-X shown uncoupled.

Release at the socket sleeve

The sliding sleeve on the female socket releases the locking mechanism so you can separate the two halves by hand.

CC-UQD4-X with a hose barb and an externally threaded end.

Connect a threaded port to soft tubing

CC-UQD2-X, CC-UQD4-X, and CC-UQD6-X have an externally threaded plug end and a hose barb on the socket end. Match the tubing's inside diameter to the barb.

CC-UQD4D-X shown coupled.

Threaded connections at both ends

Choose CC-UQD4D-X when your plumbing calls for a coupling with a G1/4 threaded connection at each end.

Key Specifications

Housing material316L stainless steel
ColorSilver
Coupled length × sleeve diameterCC-UQD2-X · 73.2 × 20 mm
CC-UQD4D-X · 71.4 × 25.2 mm
Bore diameterCC-UQD2-X · 3 mm
CC-UQD6-X · 7 mm
Net weightCC-UQD2-X · 67.1 g
CC-UQD6-X · 231.3 g
Max. working flowCC-UQD2-X · 8.6 L/min
CC-UQD6-X · 46.5 L/min

Which Version Do I Need?

Four CC-UQD optionsTHIS PAGE
Use the Fits / Use With list to match the two ends of your loop connection.
Choose this separately listed model for a G1/2 externally threaded plug and a barb for 5/8 in. ID soft tubing.

What's in the Box

1 × quick disconnect coupling (male plug and female socket)

Installation & Use

1
Connect the ends of the selected coupling to the matching fittings or soft tubing on your loop.
2
Push the plug into the socket and confirm that it locks. Leak-test the connection before powering the system.
3
When servicing the loop, use the sliding sleeve on the socket to release the lock, then separate the two halves.

Have matching threaded fittings or ports ready. For a barbed model, use soft tubing with the specified inside diameter.

CC-UQD6-X shown with both halves locked together.

FAQ

Do both sides shut off when I disconnect the coupling?

Yes. The male plug and female socket each close when separated.

How do CC-UQD4-X and CC-UQD4D-X differ?

CC-UQD4-X has a hose barb at one end. CC-UQD4D-X has G1/4 threaded connections at both ends.

Which version uses 1/2-inch ID soft tubing?

CC-UQD6-X has a hose barb for 1/2 in. ID soft tubing. Check the mating port thread before ordering.

Does the coupling come with both halves?

Yes. Each selected coupling consists of one male plug and one female socket.