Description
The Bykski CT-DNA-AL-V2 is a standalone 190 mm reservoir that holds coolant for a separate pump in a custom PC water cooling loop. The clear acrylic tube puts the internal spiral and coolant level in view. Ports at both ends let you route tubing around the other parts in your case.
Check the case clearance with your fittings, mounting hardware, and tubing in place. Connect the light to 5V only.
The T-Virus design puts a double spiral inside the acrylic tube. Three ports in each aluminum end cap give you connection points at both ends of the reservoir.
The included Bykski RBW light illuminates the spiral. Choose the spiral color and end-cap finish together in the product selector.
| Model | CT-DNA-AL-V2 |
|---|---|
| Overall length | 190 mm |
| End cap outer diameter | 56 mm |
| Tube | Clear acrylic |
| End caps | Aluminum alloy |
| Port threads | 6 × G1/4 female, 3 per cap |
| Lighting | 5V 3-pin addressable RGB (Bykski RBW) |
| End cap / spiral pairings | Black / black, red, or blue Gunmetal (Gun Cover) / black, white, red, or blue Red / red Blue / blue |
Choose by end-cap material and spiral color.
For a complete loop, you’ll also need a separate pump, a water block, a radiator, tubing, G1/4 fittings, and coolant.
A separate pump is required. Connect the reservoir to it with tubing.
It is 190 mm long, with 56 mm diameter end caps. Allow extra room for mounting hardware, fittings, and tubing.
Use G1/4 male-thread fittings. Match the tubing side of each fitting to the tubing you’re using.
It uses Bykski 5V 3-pin addressable RGB, called RBW. Keep it off 12V RGB headers.