G1/4 Coolant Temperature Sensor Plug – Bykski B-PD5-TMR

Bykski · B-PD5-TMR

G1/4 coolant temperature sensor plug

The Bykski B-PD5-TMR closes an unused G1/4 port in a custom PC water-cooling loop and measures coolant temperature at that port. A 10 kΩ NTC thermistor sits inside the metal plug. The attached lead carries the temperature signal to a compatible 2-pin sensor input.

Fits
G1/4 ports
Sensor
10 kΩ NTC
Connector
2-pin

Use With

Choose an unused female G1/4 port.

  • ✓G1/4 ports on pumps, reservoirs, distro plates, and CPU or GPU water blocks
  • ✓A 2-pin temperature input that supports a 10 kΩ NTC probe

Check that the port has room for the probe tip, and confirm sensor input support in your device manual.

Key Specifications

ModelB-PD5-TMR
ThreadG1/4 male
Sensor10 kΩ NTC thermistor
Connector2-pin
Body materialMetal
Body size (black)17.4 mm cap diameter × 15.8 mm overall height
Color optionsBlack or Silver

What's in the Box

Temperature-sensing plug with attached 2-pin lead

FAQ

Does this plug measure flow rate?

The sensor measures coolant temperature only. The plug seals the port.

Can I connect it to a motherboard?

Check your motherboard manual for a 2-pin temperature sensor input that supports a 10 kΩ NTC probe.

Notes
  • Not responsible for any damage caused by or when using this product.