Description
The Bykski B-RBW-C8-V5 brings 5V 3-pin addressable RGB lighting and cooling controls together on one board. Connect compatible fans, a pump, and their lighting leads at the hub. Use the remote to change lighting effects and brightness, or connect the hub to a compatible motherboard ARGB header to synchronize the lighting.
Check the voltage and connector on each lead.
Not compatible:
The 12V specification is for the fan motor connections. The lighting connections use 5V.
Each of the six fan positions pairs a fan motor header with an ARGB header. The pump position has its own motor and ARGB headers. FAN1 and PUMP send back real-time speed readings.
Lighting control at the remote or motherboard
Use the remote to pick a solid color, switch effects, or adjust brightness and effect speed. It also has separate buttons for fan and pump speed.
| Model | Bykski B-RBW-C8-V5 |
|---|---|
| Lighting | 5V DC, 3-pin addressable RGB (RBW) |
| Fan connections | 6 × 2510 4-pin, 12V DC |
| Pump connection | 1 × 2510 4-pin |
| Speed feedback | FAN1 and PUMP |
| Power input connector | 4-pin peripheral Molex |
| Published module load limits | 6 A maximum load current, 72 W supported power |
| Lighting control | Remote or 5V 3-pin motherboard ARGB sync |
Match both the device connectors and the power lead to the hub.
You’ll need a PC power supply with a 4-pin peripheral Molex lead and devices with the matching connectors above.
Use 5V 3-pin ARGB lights only. For motherboard lighting sync, use a 5V 3-pin ARGB header.
The remote can control the lighting directly. A 5V 3-pin ARGB header is required for motherboard lighting sync.
Use a compatible sync cable to connect the hub to the motherboard’s 5V 3-pin ARGB header. Align the arrow on the sync connector with the motherboard header’s +5V pin. After powering on, press MAINBOARD MODE on the remote.
The FAN1 and PUMP ports provide real-time speed feedback.
Use GFM mode for a compatible Granzon pump and normal mode for a compatible standard 4-pin pump. Power-cycle the hub after changing the mode.