Bykski · RGV-AS-GT501-P
Waterway board with a preinstalled DDC pump
The Bykski RGV-AS-GT501-P is an acrylic distro plate for custom water cooling in the ASUS TUF Gaming GT501. Its built-in channels route coolant between the components in your loop. This configuration includes a preinstalled DDC pump with a heat-dissipation cover so you can build around the plate with your choice of blocks and radiator.
Fits
ASUS TUF Gaming GT501
Compatibility
Check the exact case model before ordering. Bykski's example loop uses a CPU block and one GPU block.
Key Specifications
| Plate model | RGV-AS-GT501-P |
|---|
| Configuration SKU | RGV-AS-GT501-P_DPC |
|---|
| Plate body | Clear PMMA acrylic |
|---|
| Mounting backplate | Aluminum alloy |
|---|
| Plate length × width | 322 × 130 mm |
|---|
| Port thread | G1/4 |
|---|
| Pump | Preinstalled DDC with heat-dissipation cover |
|---|
| Lighting connector | 5V 3-pin ARGB (Bykski RBW) |
|---|
Which Version Do I Need?
GT501 distro plate + DDC pumpTHIS PAGE
Choose this combination if you plan to source the rest of the loop yourself.
Choose the kit if you want a bundled loop. Select the Intel or AMD CPU option and confirm the GPU block with FormulaMod before ordering.
What's in the Box
Distro plate with 5V ARGB lightingPreinstalled DDC pump with heat-dissipation coverMounting hardwareLighting sync cable
Installation & Use
1Mount the distro plate in the GT501 using the screw points on the aluminum backplate.
2Use G1/4 fittings and tubing to connect the plate to your blocks and radiator.
3Fill the loop before running the pump. Keep the pump supplied with coolant while filling and leak-test with the rest of the PC unpowered.
You’ll also need water blocks, a radiator, G1/4 fittings, tubing, and coolant.
FAQ
Does this distro plate come with a pump?
Yes. The DDC pump and its heat-dissipation cover come preinstalled on the plate.
How do I connect the lighting?
Use the included sync cable with a 5V 3-pin ARGB motherboard header. Supply a compatible controller if your board has no 5V 3-pin ARGB header.
What fittings should I use?
Use G1/4 fittings that match the tubing in your loop.
Notes- This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
- If not notified in time, the Bykski's latest real object shall prevail.