Bykski · RGV-AS-Z11-P
Custom water cooling kit for the ASUS ROG Z11
The Bykski RGV-AS-Z11-P kit is designed for a custom loop that cools the CPU and one graphics card in an ASUS ROG Z11 case. Its front-mounted distro plate routes coolant to the CPU and GPU water blocks. The clear acrylic plate has G1/4 ports and 5V addressable RGB lighting.
Plate lighting
5V 3-pin ARGB
Compatibility
Check your case, CPU socket, and graphics card before ordering.
CPU. Choose the Intel or AMD kit option and confirm your exact socket with us.
Graphics card. Send us your full card model and PCB revision for a fit check before you order.
ASUS ROG Z11 example build. Case shown for reference.
Design Highlights
Angled view of the example build.
Front-mounted coolant routing
The distro plate mounts at the front of the case. Its internal channels connect the CPU and GPU water blocks to the rest of the loop.
Bykski’s reference layout uses two radiators. ASUS specifies a rear mount for a 120 mm or 240 mm radiator and lists fan mounts at the top.
Clear acrylic plate with a DDC mount
The CNC-machined plate lets you see the coolant channels. A DDC pump mounts directly to the plate, and G1/4 ports connect it to the loop.
Key Specifications
| Distro plate model | RGV-AS-Z11-P |
|---|
| Intel kit SKU | RGV-AS-Z11-P-Intel |
|---|
| AMD kit SKU | RGV-AS-Z11-P-AMD |
|---|
| Distro plate body | Clear CNC-machined acrylic (PMMA) |
|---|
| Distro plate dimensions (L × W × T) | 360 × 113.50 × 31.50 mm |
|---|
| Distro plate port thread | G1/4 |
|---|
| Pump mount | DDC |
|---|
| Distro plate lighting | 5V ARGB (Bykski RBW), 3-pin motherboard header |
|---|
Which Version Do I Need?
The AMD kit comes with a pump-equipped Z11 distro plate. The Intel kit comes with a Z11 distro plate and a separate covered DDC pump.
RGV-AS-Z11-P cooling kitTHIS PAGE
Choose this kit if you need the distro plate and the components for a CPU and single-GPU loop. Select the Intel or AMD configuration.
Choose the distro plate with a covered DDC pump if you already have the other loop components or want to select them individually.
What’s in the Box
RGV-AS-Z11-P distro plate with covered pump (AMD kit)RGV-AS-Z11-P distro plate and separate covered DDC pump (Intel kit)Mounting bracket for the distro plate reservoir5V 3-pin motherboard ARGB adapter cableCPU water block for your selected platform with a motherboard mounting backplate1 × full-cover GPU water block selected for your graphics card, with a matching backplate and thermal padsSlim 240 mm copper radiator with mounting screwsPWM ARGB case fans with mounting screwsARGB lighting controllerPre-bent acrylic hard tubing8 × 14 mm OD hard-tube fittings7 × 90° rotary fittings2 × 45° rotary fittingsExtension fittings, one each at 7.5, 20, 25, and 40 mmAdjustable extension fittings (16–22 mm and 41–69 mm)Loop stop plugsAir vent valvePull drain valve
After ordering, contact us to confirm your graphics card model and PCB revision so we can match your GPU water block.
Confirm the radiator count and mounting locations for your configuration with us before ordering.
If your configuration uses an acrylic-top full-cover gaming GPU block, that block includes 2 × G1/4 stop plugs as block accessories.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Confirm the radiator configuration and mounting locations for your Z11 before ordering. Check block fit and clearance for the fans and fittings before assembling the loop.
2Remove the original coolers and install the matching CPU and GPU blocks. Use thermal paste and place GPU thermal pads as directed by the instructions for each block.
3Mount the distro plate at the front of the case and check that the pump is seated on the plate. Install the confirmed cooling components, then test-fit the hard tubing before connecting it to the G1/4 ports.
4For motherboard lighting sync, use the included adapter cable to connect the plate lighting to a 5V 3-pin ARGB header. Keep it off the 12V RGB header.
5Fill the loop and leak-test it with only the pump powered. Keep coolant at the pump inlet and check the fittings for leaks before powering the rest of the PC.
You also need PC liquid-cooling coolant.
Plate and Build Photos
Reverse side of the distro plate.
Addressable lighting on the distro plate.
Water block and tubing in the example build.
Side view of the example build.
FAQ
Does the kit fit other ASUS ROG cases?
Bykski specifies the ASUS ROG Z11 for this distro plate.
How do I choose the GPU water block?
We match the block to your graphics card. After ordering, contact us to confirm the exact card model and PCB revision.
Can I plug the plate lighting into a 12V RGB header?
Use the included adapter cable to connect the plate lighting to a 5V 3-pin ARGB header. A 12V 4-pin RGB header is incompatible.
Do I need to buy coolant separately?
Yes. Supply your own PC cooling coolant.
Notes- The case, motherboard, and memory water blocks are shown for reference only. The finished build depends on your configuration.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc.,
If not notified in time, the Bykski's latest real object and the newest list shall prevail