Description
Dow Corning TC-5688 is a non-curing silicone thermal paste for the interface between a processor and its heatsink. The paste fills small gaps between those surfaces so heat can transfer into the cooler. Use it when remounting a processor heatsink that specifies thermal grease.
Dow Corning developed and tested TC-5688 for this mobile processor.
When servicing another device, check its service instructions for the specified thermal interface material.
Dow Corning reported that the grease resisted moving out of the contact area as the processor assembly repeatedly heated up and cooled down in its tests.
Remove the cap to dispense the paste onto the processor's heatsink contact surface. Follow the device or cooler instructions for the amount and placement.
| Model (SKU) | TC-5688 |
|---|---|
| Material | Silicone-based thermal grease |
| Cure type | Non-curing |
| Compound color | Gray |
| Package format | Capped syringe |
Have a lint-free cloth, the cleaner specified by the device manufacturer, and the tools required to remove and refit the heatsink.
Check the model printed on the syringe. This product is Dow Corning TC-5688, and Dow lists DOWSIL TC-5888 under a separate part number.
Pump-out is movement of the paste away from the processor-to-heatsink contact area during repeated heating and cooling. Dow Corning reported resistance to this movement in its TC-5688 tests.
TC-5688 is a non-curing thermal grease.
Replace the paste whenever you remove and reinstall the heatsink. Clean both contact surfaces before applying a fresh layer.