FormulaMod · Fm-BZXZ-Corsair

Sleeved modular PSU replacement cables for Corsair builds

The Fm-BZXZ-Corsair is the Corsair version of FormulaMod’s 18 AWG modular PSU cable kit. Its individually sleeved DC leads plug directly into the power supply, with three kit options for different cable runs and PCIe cable counts. Before ordering, give Corsair your exact power supply model and the FormulaMod part number to confirm whether you can use the kit.

Fits
Check your exact Corsair PSU
Wire gauge
18 AWG
Cable kits
A · A+ · B

Compatibility

Match your exact Corsair PSU model and revision before ordering.

Type 5 cable requirement. Corsair specifies Type 5 cables for both generations of RMx SHIFT, the SF850L and SF1000L, and the 2024 ATX 3.1 versions of the SF750, SF850 and SF1000.

FormulaMod’s legacy compatibility list does not cover those models. Use the cables Corsair specifies for your exact PSU.

Read the model and part number on the PSU label and follow the manual for that exact unit. Keep using the original Corsair cables unless Corsair confirms you can use Fm-BZXZ-Corsair.

Matching connector shapes and visible pin positions alone cannot establish electrical compatibility. The wrong modular cables can damage hardware.

Design Highlights

Individual braided sleeves

Each 18 AWG wire has its own braided sleeve over the insulation.

Cable combs for routing

Use the included combs to keep the sleeved wires parallel. Kit B has shorter ATX, EPS and PCIe runs. The standard Kit A+ pack adds a third PCIe cable at the same length as Kit A.

Key Specifications

ModelFm-BZXZ-Corsair
Cable construction18 AWG conductors, insulation, individual braided sleeves
Sleeved wire diameter3 mm nominal, per FormulaMod’s original specification.
ATX 24-pinA / A+: 1 × 650 mm
B: 1 × 400 mm
CPU EPS 4+4-pinA / A+: 1 × 850 mm
B: 1 × 650 mm
PCIe 6+2-pinA: 2 × 650 mm
A+ standard pack: 3 × 650 mm
B: 2 × 400 mm
SATA powerA / A+: 1 × 350 mm and 1 × 500 mm
B: 1 × 400 mm and 1 shorter cable
Molex 4-pinA / A+: 1 × 350 mm and 1 × 400 mm
B: 1 × 350 mm

Sleeve Colors

Orange

Red

White

Blue

Green

Black

Sky Blue

Silver

Grey

Purple

Pink

Also available in Black x Green and Black x Red.

Which Version Do I Need?

For direct replacements, start with the exact power supply model. For extensions, check the connectors on the component ends of your existing cables.

Fm-BZXZ-CorsairTHIS PAGE
Corsair version. Confirm this part number for your exact PSU before choosing a kit. For Kit A+ in Black, confirm the 9-cable pack with three PCIe leads before ordering.
Compare this version for EVGA modular PSUs. Verify the exact model before ordering.
Compare this version for ASUS, Seasonic or Antec modular PSUs. Verify the exact model before ordering.
Compare this kit if you need extra reach at the component ends of your existing cables.

What's in the Box

Kit A · 8 cablesKit A+ standard pack · 9 cablesKit B · 7 cables

For Kit A+ in Black, confirm the 9-cable pack with three PCIe leads before ordering.

Key Specifications lists the standard cable contents. Each kit includes a set of cable combs.

SATA splitter cables are not included.

Cable comb styles shown in FormulaMod’s reference photo.

Installation & Use

1
Confirm that Corsair permits this kit for your exact PSU. Check that the selected kit covers the power connectors your motherboard, graphics card and drives require.
2
Turn off the PC and unplug the AC power cord. Disconnect the DC cables you’re replacing at both ends.
3
Follow the PSU manual and its port labels. Connect ATX and EPS to the motherboard, PCIe to the graphics card, and SATA or Molex to the corresponding devices.
4
Check that every required plug is fully seated at both ends before reconnecting AC power.

Use your own power supply and its AC power cord. If your hardware needs a connector or cable count the kit does not provide, use the cables your PSU manufacturer specifies.

FAQ

Are these Corsair PSU cable extensions?

These leads plug directly into the PSU’s modular ports. An extension connects to the component end of an existing PSU cable.

How do I check Corsair PSU cable compatibility?

Read the exact model and part number on the power supply label and check its manual. Ask Corsair to confirm Fm-BZXZ-Corsair for that unit before ordering.

Which kit has three PCIe leads?

The standard Kit A+ pack has three 650 mm PCIe 6+2-pin cables. If you’re choosing Kit A+ in Black, confirm that the pack comes with all three before ordering. Kits A and B each include two PCIe 6+2-pin cables.

Does the kit include a 16-pin GPU cable?

The GPU leads are PCIe 6+2-pin. If your graphics card requires 12VHPWR or 12V-2x6, use a cable specified by the PSU manufacturer for your model.

Is a SATA splitter included?

Each kit includes two SATA power cables. A separate SATA splitter is not included.

Notes
  • The power supply in the picture is only for reference display
  • The original terms below refer to FormulaMod’s legacy list. Follow the compatibility instructions above for your exact power supply.
  • These modular PSU cables are only compatible with the PSUs in the list.
  • If they use in other PSUs that are out of the list and cause any damage, we are not responsible for this.