Description
The Fm-BZXZ-Corsair is the Corsair version of FormulaMod’s 18 AWG modular PSU cable kit. Its individually sleeved DC leads plug directly into the power supply, with three kit options for different cable runs and PCIe cable counts. Before ordering, give Corsair your exact power supply model and the FormulaMod part number to confirm whether you can use the kit.
Match your exact Corsair PSU model and revision before ordering.
Type 5 cable requirement. Corsair specifies Type 5 cables for both generations of RMx SHIFT, the SF850L and SF1000L, and the 2024 ATX 3.1 versions of the SF750, SF850 and SF1000.
FormulaMod’s legacy compatibility list does not cover those models. Use the cables Corsair specifies for your exact PSU.
Read the model and part number on the PSU label and follow the manual for that exact unit. Keep using the original Corsair cables unless Corsair confirms you can use Fm-BZXZ-Corsair.
Matching connector shapes and visible pin positions alone cannot establish electrical compatibility. The wrong modular cables can damage hardware.
Each 18 AWG wire has its own braided sleeve over the insulation.
Use the included combs to keep the sleeved wires parallel. Kit B has shorter ATX, EPS and PCIe runs. The standard Kit A+ pack adds a third PCIe cable at the same length as Kit A.
| Model | Fm-BZXZ-Corsair |
|---|---|
| Cable construction | 18 AWG conductors, insulation, individual braided sleeves |
| Sleeved wire diameter | 3 mm nominal, per FormulaMod’s original specification. |
| ATX 24-pin | A / A+: 1 × 650 mm B: 1 × 400 mm |
| CPU EPS 4+4-pin | A / A+: 1 × 850 mm B: 1 × 650 mm |
| PCIe 6+2-pin | A: 2 × 650 mm A+ standard pack: 3 × 650 mm B: 2 × 400 mm |
| SATA power | A / A+: 1 × 350 mm and 1 × 500 mm B: 1 × 400 mm and 1 shorter cable |
| Molex 4-pin | A / A+: 1 × 350 mm and 1 × 400 mm B: 1 × 350 mm |
Orange
Red
White
Blue
Green
Black
Sky Blue
Silver
Grey
Purple
Pink
Also available in Black x Green and Black x Red.
For direct replacements, start with the exact power supply model. For extensions, check the connectors on the component ends of your existing cables.
For Kit A+ in Black, confirm the 9-cable pack with three PCIe leads before ordering.
Key Specifications lists the standard cable contents. Each kit includes a set of cable combs.
SATA splitter cables are not included.
Use your own power supply and its AC power cord. If your hardware needs a connector or cable count the kit does not provide, use the cables your PSU manufacturer specifies.
These leads plug directly into the PSU’s modular ports. An extension connects to the component end of an existing PSU cable.
Read the exact model and part number on the power supply label and check its manual. Ask Corsair to confirm Fm-BZXZ-Corsair for that unit before ordering.
The standard Kit A+ pack has three 650 mm PCIe 6+2-pin cables. If you’re choosing Kit A+ in Black, confirm that the pack comes with all three before ordering. Kits A and B each include two PCIe 6+2-pin cables.
The GPU leads are PCIe 6+2-pin. If your graphics card requires 12VHPWR or 12V-2x6, use a cable specified by the PSU manufacturer for your model.
Each kit includes two SATA power cables. A separate SATA splitter is not included.