Description
The FormulaMod Fm-DYXZ is an 18 AWG cable kit that replaces the original DC cables on select fully modular desktop power supplies, including listed EVGA SuperNOVA and Corsair models. The silver-plated wires run directly from the PSU to the motherboard, graphics card, and peripherals. Choose the PSU version first, then pick the kit for your cable runs and GPU power connectors.
Match the exact power supply model and revision before choosing a kit.
For the Seasonic or Antec option, ask FormulaMod to confirm your exact PSU model before ordering.
Use the model number and revision from the PSU label to confirm the PSU-side pinout with FormulaMod. A mismatch can damage components even when the plugs fit. Select your confirmed PSU option before choosing A, A+, or B.
The clear jacket leaves the silver-plated wire visible. The included cable combs keep the wires aligned.
Kit B uses shorter motherboard, CPU, and GPU leads than Kits A and A+. Measure the route behind your motherboard tray before choosing.
| Model | FormulaMod Fm-DYXZ |
|---|---|
| Cable type | Direct-replacement modular DC power cables |
| Wire | 18 AWG, silver plated |
| Jacket | Clear insulation |
| Cable diameter | 2 mm |
| Terminals | Copper |
| ATX 24-pin length | A and A+ 650 mm B 400 mm |
| EPS 4+4-pin length | A and A+ 850 mm B 650 mm |
| PCIe 6+2-pin length | A and A+ 650 mm B 400 mm |
| SATA power lengths | A and A+ 350 mm and 500 mm B includes one 400 mm lead |
| Kit A SATA splitter | 350 mm to the first connector, then 50 mm between connectors |
| Molex 4-pin length | All kits 350 mm |
Kit A. 1 ATX 24-pin, 1 EPS 4+4-pin, 2 PCIe 6+2-pin, 2 SATA power, 1 SATA splitter, and 1 Molex 4-pin cable.
Kit A+. 1 ATX 24-pin, 1 EPS 4+4-pin, 3 PCIe 6+2-pin, 2 SATA power, 1 SATA splitter, and 1 Molex 4-pin cable.
Kit B. 1 ATX 24-pin, 1 EPS 4+4-pin, 2 PCIe 6+2-pin, 2 SATA power, and 1 Molex 4-pin cable.
All three kits include cable combs.
You’ll need a confirmed compatible fully modular PSU and its AC power cord.
Check the SuperNOVA G2, G3, and G+ entries above. Use the full model number on your power supply label to confirm the EVGA option with FormulaMod.
They plug directly into the modular PSU and replace its DC cables. If you want to keep the original cables, use extensions at the component ends.
All three kits include two SATA power cables. Kit A and Kit A+ each add a SATA splitter.
Kit A+ includes three 650 mm PCIe 6+2-pin cables. Kits A and B each include two PCIe cables.
Each kit includes PCIe 6+2-pin GPU leads. The kit contains neither a native 12VHPWR nor a native 12V-2x6 lead.