FormulaMod · Fm-FCW
Add a dust filter to a 120 mm case intake
The FormulaMod Fm-FCW is a magnetic dust filter for 120 mm PC case fan openings. The black PVC mesh sits across the opening to help catch dust as air enters the case. Four magnetic strips around the underside secure the filter to the case.
Fits
120 mm case fan openings
Mount
Magnetic strips on four edges
Fit & Mounting
For 120 mm PC case fan openings with a rim that holds a magnet.
Before ordering, check that the 120 × 120 mm filter will sit flat against the rim.
Design Highlights
Black PVC mesh
The mesh spans the fan opening to help keep dust from entering the case.
Magnetic edges
Each edge has a 10 mm wide magnetic strip on the underside. This is the side that goes against the case.
Key Specifications
| Model / SKU | Fm-FCW (1 filter) Fm-FCWx3 (3 filters) |
|---|
| Filter dimensions (L × W × T) | 120 × 120 × 2 mm |
|---|
| Mesh material | PVC |
|---|
| Color | Black |
|---|
| Mounting | Magnetic strips on all four underside edges |
|---|
| Magnetic strip width | 10 mm |
|---|
Which Version Do I Need?
FormulaMod Fm-FCW Magnetic FilterTHIS PAGE
Choose this version for a 120 mm case fan opening with a rim that holds a magnet.
Choose the screw-mount version to fasten the filter to a 120 mm fan with matching corner screw holes.
What's in the Box
Fm-FCW: 1 magnetic mesh filterFm-FCWx3: 3 magnetic mesh filters
Installation & Use
1Measure the area around the fan opening and test the rim with a magnet where the strips will sit.
2Center the mesh over the opening with the magnetic strips facing the case.
3Set the filter down so the strips sit flat against the rim.
FAQ
How can I check that the filter will hold to my case?
Test the rim with a magnet where the filter’s four underside strips will sit.
How much room should I leave for the filter?
Each filter is 120 × 120 mm and 2 mm thick, including the underside strips.
What do I get in the three-pack?
Fm-FCWx3 contains three separate 120 × 120 mm magnetic mesh filters.