FormulaMod · Fm-NP8P
PCIe 8-Pin (6+2) GPU Power Extension Cable
The FormulaMod Fm-NP8P extends the existing PCIe power cable to a graphics card with an 8-pin power socket. The 6+2-pin plug goes into the card, and the other end accepts your power supply’s original PCIe cable. Choose a length and color to suit the way you route the cable through your case.
Fits
PCIe 8-pin GPU sockets
Compatibility
Check the power socket on your graphics card.
- ✓PCIe 8-pin auxiliary power socket, using the 6+2-pin plug together
Not compatible:
- ✗CPU/EPS power inputs
- ✗Native 16-pin 12VHPWR or 12V-2x6 GPU power sockets
Keep your original PSU cable connected to the power supply. Plug this extension into the device end of that cable.
Before ordering, check the GPU socket and the side of its latch.
Design Highlights
Pre-bent around the GPU connection
The cable comes with a 180° bend away from the GPU plug’s latch. Use the latch position to check which way the cable will turn in your case.
Individually sleeved wires
Two preinstalled round combs keep the wires lined up along the bend. The cable is available in solid colors and two-tone combinations.
Key Specifications
| Model | Fm-NP8P |
|---|
| Connector type | PCIe 8-pin (6+2) GPU plug and a connector for the original PCIe power cable |
|---|
| Wire gauge | 18 AWG |
|---|
| Individual wire diameter | 3 mm |
|---|
| Nominal cable lengths | 200–1,000 mm in 100 mm increments |
|---|
| Wire length tolerance | ±10 mm |
|---|
| Solid pink SKUs | 800 mm (Fm-NP8P_PK_800), 900 mm (Fm-NP8P_PK_900) |
|---|
Manufacturer’s single-wire drawing. Measurements are in millimeters.
Which Version Do I Need?
Fm-NP8P · PCIe 8-pin (6+2)THIS PAGE
Choose this cable for an 8-pin PCIe socket on your graphics card.
Choose this version for a 6-pin PCIe socket on your graphics card.
Choose this version for the 4-pin ATX12V CPU power socket on your motherboard.
What's in the Box
1 × Fm-NP8P extension cable2 × round cable combs (preinstalled)
Installation & Use
1Shut down the computer, switch off the power supply, and unplug its AC power cord.
2Plug the device end of the original PCIe power cable into the extension’s receiving end.
3Line up the 2-pin piece with the 6-pin piece. Insert them together into the GPU’s 8-pin power socket until the plug is fully seated and latched.
4Route the cable so it does not pull on either connection. Check both ends before restoring power.
You’ll need the original PCIe power cable for your power supply.
The original PSU cable connects on the left. The plug on the right connects to the GPU.
FAQ
Can I plug the Fm-NP8P directly into a modular power supply?
Connect it to the device end of your original PCIe power cable. Keep that original cable connected to the PSU.
Can I use this as an 8-pin EPS CPU extension?
Use a dedicated EPS extension for CPU power. The CPU’s EPS connector uses a different pin layout.
Which way does the extension bend?
The 180° pre-bend turns away from the latch on the GPU plug. Check the latch position on your card before you pick a routing path.
Do the cable combs come installed?
Yes. The single extension comes with two round cable combs already installed.
Cable color photos
Two-Tone Colors
Notes- Because of the different display setting of each computer, the pictures and real objects will be slightly color different.
- In case of upgrading to the appearance and structure, or different batches of material, no further notice, the real object shall prevail.