FormulaMod · Fm-NP8P

PCIe 8-Pin (6+2) GPU Power Extension Cable

The FormulaMod Fm-NP8P extends the existing PCIe power cable to a graphics card with an 8-pin power socket. The 6+2-pin plug goes into the card, and the other end accepts your power supply’s original PCIe cable. Choose a length and color to suit the way you route the cable through your case.

Fits
PCIe 8-pin GPU sockets
Wire gauge
18 AWG
Lengths
200–1,000 mm
Bend
180° pre-bent

Compatibility

Check the power socket on your graphics card.

  • ✓PCIe 8-pin auxiliary power socket, using the 6+2-pin plug together

Not compatible:

  • ✗CPU/EPS power inputs
  • ✗Native 16-pin 12VHPWR or 12V-2x6 GPU power sockets

Keep your original PSU cable connected to the power supply. Plug this extension into the device end of that cable.

Before ordering, check the GPU socket and the side of its latch.

Design Highlights

Pre-bent around the GPU connection

The cable comes with a 180° bend away from the GPU plug’s latch. Use the latch position to check which way the cable will turn in your case.

Individually sleeved wires

Two preinstalled round combs keep the wires lined up along the bend. The cable is available in solid colors and two-tone combinations.

Key Specifications

ModelFm-NP8P
Connector typePCIe 8-pin (6+2) GPU plug and a connector for the original PCIe power cable
Wire gauge18 AWG
Individual wire diameter3 mm
Nominal cable lengths200–1,000 mm in 100 mm increments
Wire length tolerance±10 mm
Solid pink SKUs800 mm (Fm-NP8P_PK_800), 900 mm (Fm-NP8P_PK_900)

Manufacturer’s single-wire drawing. Measurements are in millimeters.

Which Version Do I Need?

Fm-NP8P · PCIe 8-pin (6+2)THIS PAGE
Choose this cable for an 8-pin PCIe socket on your graphics card.
Choose this version for a 6-pin PCIe socket on your graphics card.
Choose this version for the 4-pin ATX12V CPU power socket on your motherboard.

What's in the Box

1 × Fm-NP8P extension cable2 × round cable combs (preinstalled)

Installation & Use

1
Shut down the computer, switch off the power supply, and unplug its AC power cord.
2
Plug the device end of the original PCIe power cable into the extension’s receiving end.
3
Line up the 2-pin piece with the 6-pin piece. Insert them together into the GPU’s 8-pin power socket until the plug is fully seated and latched.
4
Route the cable so it does not pull on either connection. Check both ends before restoring power.

You’ll need the original PCIe power cable for your power supply.

The original PSU cable connects on the left. The plug on the right connects to the GPU.

FAQ

Can I plug the Fm-NP8P directly into a modular power supply?

Connect it to the device end of your original PCIe power cable. Keep that original cable connected to the PSU.

Can I use this as an 8-pin EPS CPU extension?

Use a dedicated EPS extension for CPU power. The CPU’s EPS connector uses a different pin layout.

Which way does the extension bend?

The 180° pre-bend turns away from the latch on the GPU plug. Check the latch position on your card before you pick a routing path.

Do the cable combs come installed?

Yes. The single extension comes with two round cable combs already installed.

Cable color photos

Two-Tone Colors

Blue x Black

Green x Black

Sky Blue x Black

White x Black

Gray x Black

Orange x Black

Pink x Black

Purple x Black

Red x Black

Silver x Black

Notes
  • Because of the different display setting of each computer, the pictures and real objects will be slightly color different.
  • In case of upgrading to the appearance and structure, or different batches of material, no further notice, the real object shall prevail.