PCIe 5.0 Vertical GPU Mount Kit with x16 Riser Cable | FormulaMod Fm-XKCZTZ-5.0-BK

FormulaMod · Fm-XKCZTZ-5.0-BK

Vertical GPU mount with a PCIe 5.0 riser

The FormulaMod Fm-XKCZTZ-5.0-BK is a black vertical GPU mount for compatible ATX cases. The steel bracket holds a desktop graphics card with its face toward the case side panel. The included PCIe 5.0 x16 riser cable links the card to the motherboard’s graphics slot.

Fits
Compatible ATX cases
Riser
PCIe 5.0 x16
Color
Black

Compatibility

Check the rear expansion-slot area and clearance for your exact GPU before ordering.

Use the bracket dimensions to check the mounting area. Make sure the card and cooler clear the side panel, bottom fans, and other cards, and that you can reach the GPU’s display ports.

FormulaMod shows example builds in the Lian Li LANCOOL 216 and Jonsbo D41.

Design Highlights

Rear-mounted steel bracket

The 1.5 mm steel bracket fastens at the rear expansion-slot area and holds the card upright inside the case.

Riser for the motherboard connection

The edge connector plugs into the motherboard. The socket at the other end sits on the bracket and accepts the graphics card.

Key Specifications

ModelFm-XKCZTZ-5.0-BK
ColorBlack
Bracket material1.5 mm steel plate
Bracket dimensions (D × W × H)197 × 121 × 127 mm
Riser interfacePCIe 5.0 x16

Manufacturer’s bracket dimensions in millimeters.

Which Version Do I Need?

Fm-XKCZTZ-5.0-BKTHIS PAGE
Choose this black steel bracket and riser kit for a vertical GPU build.
Choose Set (Includes Stand and Cables) if you want the mount with a 5V 3-pin ARGB light strip and the riser cable.

What's in the Box

1 × black vertical GPU bracket1 × PCIe 5.0 x16 riser cable

Installation & Use

1
Shut down the PC and unplug it. Remove the graphics card if it’s installed and make room at the rear expansion slots.
2
Assemble the bracket and secure the riser’s socket end to its base.
3
Seat the graphics card in the riser socket and secure the card’s I/O bracket to the mount.
4
Plug the riser into the motherboard’s PCIe x16 graphics slot and fasten the mount to the case.
5
Reconnect the GPU power and display cables. Check clearance before closing the side panel and powering on.

You’ll need a compatible case, motherboard, and graphics card, plus the power and display cables your card uses.

FAQ

Will the riser work with PCIe 4.0 or 3.0?

Yes. The riser supports both. Gen 5 operation requires support from the CPU, the motherboard’s graphics slot, and the GPU.

How do I check case fit?

Compare the bracket dimensions with the space at the rear slots. Allow room for the card, its cooler, and the display cable plugs.

Which color comes with this kit?

The Fm-XKCZTZ-5.0-BK includes a black bracket and black riser cable.

Notes
  • If you get no picture after installation, power off and check the riser connections, GPU power cable, and display cable.