44%OFF

PSU Cable Extension Kit, 300 mm Solid-Color Sleeved Cables | FormulaMod Fm-NCK1

FormulaMod · Fm-NCK1

Solid-color sleeved PSU cable extensions

The FormulaMod Fm-NCK1 is a 300 mm sleeved PSU cable extension kit for desktop PCs. It fits between the original power supply cables and matching motherboard or graphics card power sockets. Use the pre-bent extensions to route the visible power cables in one solid color.

Fits
Matching ATX, EPS & PCIe power
Length
300 mm (11.8 in)
Wire gauge
18 AWG
Sleeving
Solid color

Compatibility

Use these extensions on the component end of your original PSU cables.

  • ✓Motherboard main power — ATX 24-pin
  • ✓Motherboard CPU power — EPS 8-pin (4+4)
  • ✓Graphics card power — PCIe 8-pin (6+2) or PCIe 6-pin, depending on the kit

Not compatible:

  • ✗Modular PSU sockets. Never plug the extensions directly into the power supply.

Check the type, count, and latch orientation of the sockets on your motherboard and graphics card before ordering. Keep CPU EPS and GPU PCIe connectors on their respective sockets.

ATX 24-pin at top right, PCIe 8-pin at upper left, PCIe 6-pin at center right, and CPU EPS 8-pin at lower left.

Design Highlights

Red Kit A shown.

180° bends follow the connector latches

ATX 24-pin and CPU EPS cables bend toward the latch. GPU PCIe cables bend away from it. Check the latch orientation on your motherboard and graphics card before choosing how to route the cables.

From left to right, Pink, Sky Blue, Blue, and Purple.

Solid-color braided sleeves

A braided outer sleeve covers the insulation and 18 AWG conductor. The cables in each kit share one sleeve color.

Key Specifications

ModelFormulaMod Fm-NCK1
Cable length300 mm (11.8 in)
Wire gauge18 AWG
Wire diameter3 mm
Connector housing references5557 / 5559 (FormulaMod)
Kit optionsA, B, F, H
Sleeve colorsSee the Color options for your selected kit.

FormulaMod lists a nominal length of 300 mm (11.8 in).

Which Version Do I Need?

Start with the power sockets you need to extend, then choose a sleeve color.

Fm-NCK1 Solid ColorTHIS PAGE
Choose Kit A, B, F, or H to match the connectors you need.
Choose this version for black sleeving woven with a second color. It offers Kit A through H.
Choose the all-white version for white sleeves, connectors, and combs. Kit A and Kit I offer forward-bent, opposite-bent, or straight cables.

What's in the Box

Kit A · 1 × ATX 24-pin, 1 × CPU EPS 8-pin, 2 × GPU PCIe 8-pinKit B · 1 × ATX 24-pin, 1 × CPU EPS 8-pin, 2 × GPU PCIe 6-pinKit F · 1 × ATX 24-pin, 2 × CPU EPS 8-pin, 2 × GPU PCIe 8-pin, 2 × GPU PCIe 6-pinKit H · 1 × ATX 24-pin, 1 × CPU EPS 8-pin, 3 × GPU PCIe 8-pin

Each extension has two cable combs. Color photos show Kit A. Your package contains the cables listed for the kit you select.

White Kit A shown with black connectors.

Installation & Use

1
Shut down the PC, switch off the PSU, and unplug its AC power cord.
2
Leave the original PSU cables connected at the power supply. Unplug the component ends you want to extend.
3
Connect each original cable to its matching extension. Plug the other end into the corresponding motherboard or graphics card socket.
4
Check that each latch is fully seated before reconnecting AC power.

You need the original PSU cables with matching component-side connectors.

FAQ

Why does the Cable length menu show kit letters?

All four options are 300 mm long. Choose A, B, F, or H in that menu based on the type and number of power sockets you need to connect.

Which kit includes three PCIe 8-pin GPU extensions?

Kit H includes three PCIe 8-pin (6+2) extensions, one ATX 24-pin extension, and one CPU EPS 8-pin extension.

Can I plug these extensions directly into my modular PSU?

Never plug them into a modular PSU socket. Connect them between your original PSU cables and the corresponding motherboard or graphics card sockets.

What does the White option look like?

The White option is pictured with white sleeves and black connectors. Choose the separate All White kit for white sleeves, connectors, and combs.

Notes
  • Because of the different display setting of each computer, the pictures and real objects will be slightly color different.
  • All cables have been assembled, please don't disassemble at will
  • *If you need DIY adjustment, please pay attention to use special tools and not use too much force.
  • In case of upgrading to the appearance and structure, or different batches of material, no further notice, the real object shall prevail.