FormulaMod · Fm-NCK2
Sleeved PSU extension cable kit for desktop PCs
The FormulaMod Fm-NCK2 kit adds 300 mm to the original power supply cables in a desktop PC. The extensions fit between those cables and the matching ATX, EPS, or PCIe power connectors on the motherboard and graphics card. Each cable comes with two combs to keep the individually sleeved wires aligned.
Fits
ATX / EPS / PCIe power
Compatibility
Use the matching component-end connectors on your original PSU cables.
- ✓ATX 24-pin (20+4) for motherboard main power
- ✓EPS 8-pin (4+4) for motherboard CPU power
- ✓PCIe 8-pin (6+2) or PCIe 6-pin for graphics card power, depending on the kit
Keep your original PSU cables attached. Never plug these extensions directly into a modular PSU.
Before ordering, count your motherboard and GPU power sockets and check their latch directions. The ATX and EPS leads curve toward the latch. The PCIe leads curve away from it.
Design Highlights
Orange - Black, shown in Kit A.
Single-color sleeves on each wire
The accent and black wires sit side by side. The two rows use slightly different wire lengths to follow the curve, and two preinstalled combs on each extension keep the wires aligned.
Braided sleeves over insulated conductors
Each wire has a braided outer sleeve over an insulated 18 AWG conductor. FormulaMod specifies tin-plated terminals.
Key Specifications
| Model | Fm-NCK2 |
|---|
| Extension length | 300 mm (11.8 in) per cable |
|---|
| Wire gauge | 18 AWG |
|---|
| Cable diameter | 3 mm |
|---|
| Default bend | 180° |
|---|
| Color options | Blue - Black, Green - Black, Gray - Black, Orange - Black, Pink - Black, Purple - Black, Red - Black, Sky blue - Black, Silver - Black, Dark green - Black |
|---|
Manufacturer drawing showing the 300 mm extension length.
Kit A Color Examples
Which Version Do I Need?
Choose the kit letter by the power connectors you need, then pick the sleeve pattern.
Fm-NCK2 Solid ColorTHIS PAGE
Choose this version for solid-color sleeves on individual wires, with black wires alongside them.
Choose this version for two colors woven into the sleeve on individual accent wires.
What's in the Box
Kit A
1 × ATX 24-pin, 1 × EPS 8-pin
2 × PCIe 8-pinKit B
1 × ATX 24-pin, 1 × EPS 8-pin
2 × PCIe 6-pinKit C
1 × ATX 24-pin, 1 × EPS 8-pin
1 × PCIe 8-pin, 1 × PCIe 6-pinKit D
1 × ATX 24-pin, 1 × EPS 8-pin
1 × PCIe 8-pinKit E
1 × ATX 24-pin, 1 × EPS 8-pin
1 × PCIe 6-pinKit F
1 × ATX 24-pin, 2 × EPS 8-pin
2 × PCIe 8-pin, 2 × PCIe 6-pinKit G
1 × ATX 24-pin, 1 × EPS 8-pin
2 × PCIe 8-pin, 2 × PCIe 6-pinKit H
1 × ATX 24-pin, 1 × EPS 8-pin
3 × PCIe 8-pin
Each extension comes with two preinstalled cable combs.
Product photos show Kit A.
Installation & Use
1Shut down the PC, switch off the PSU, and unplug its AC power cord.
2Disconnect the matching original power lead at the motherboard or graphics card. Join the extension to that end of the original lead.
3Plug the other end of the extension into the matching component socket. Route the cable in its pre-bent direction and confirm both ends are fully seated before restoring power.
You need the original cables for your PSU.
FAQ
Do I have to keep my original PSU cables?
Yes. Connect each extension to the component end of the original PSU cable. Never connect an extension directly to the PSU.
Which kits have two PCIe 8-pin extensions?
Kits A, F, and G each include two PCIe 8-pin extensions. Kits F and G also include two PCIe 6-pin extensions each. Choose Kit H if you need three PCIe 8-pin extensions.
Can I use a PCIe 8-pin extension for CPU power?
Use the EPS 8-pin (4+4) extension for CPU power. The PCIe 8-pin (6+2) extension is for GPU power.
Does choosing a different kit letter change the length?
Every extension is 300 mm long. Kit A through Kit H change the cable assortment.
Is there a 16-pin GPU extension in the box?
The kits include only PCIe 6-pin and PCIe 8-pin (6+2) GPU extensions. Check the contents above for the quantity in each kit.
Notes- Because of the different display setting of each computer, the pictures and real objects will be slightly color different.
- All cables have been assembled, please don't disassemble at will
*If you need DIY adjustment, please pay attention to use special tools and not use too much force. - Each cable has two combs.*The color of the comb is subject to the cable kit picture. If you need to change to another color combs please contact customer service.
- In case of upgrading to the appearance and structure, or different batches of material, no further notice, the real object shall prevail.
- The product pictures of this link use "Kit A" as the display product and reference color.
The actual product content and quantity will be sent according to the kit option you selected.