FormulaMod · Fm-NCK3

300 mm sleeved PSU extension cable kit

The FormulaMod Fm-NCK3 is a 300 mm sleeved PSU extension cable kit that adds reach to your desktop PC’s motherboard, CPU, and graphics card power leads. Each extension plugs into the device end of its matching original PSU cable. Pre-bent wires and installed cable combs help keep visible runs aligned.

Fits
ATX, EPS, and PCIe power leads
Length
300 mm
Wire gauge
18 AWG

Compatible Connectors

Use the extensions with the original PSU cables at the component end.

  • ✓Motherboard main power — ATX 24-pin (20+4)
  • ✓Motherboard CPU power — EPS 8-pin (4+4)
  • ✓Graphics card power — PCIe 8-pin (6+2) and/or PCIe 6-pin, depending on the kit

Not compatible:

  • ✗Modular PSU sockets. Never plug an extension directly into the power supply.
  • ✗Native 16-pin GPU sockets (12VHPWR or 12V-2x6).

Check the type, count, and latch orientation of your device sockets before ordering. The ATX and EPS extensions curve toward the latch. The PCIe extensions curve away from it.

Design Highlights

Shaped for a 180° turn

The inner and outer rows use different wire lengths to follow the curve. Two preinstalled combs per cable keep the sleeved wires in line along the bend.

Individually sleeved wires

Each wire has a braided sleeve around its insulation and 18 AWG conductor.

Black, silver, and white sleeve combination.

Mix solid sleeve colors

Choose from 11 color combinations made with solid-color sleeves. Choose a kit for your CPU and GPU power connectors, then pick a sleeve combination under Color.

Key Specifications

ModelFm-NCK3
Extension length300 mm (11.8 in)
Wire gauge18 AWG
Nominal wire diameter3 mm
SleevingIndividual braided sleeves
Bend design180° pre-bent
Cable combs2 preinstalled per cable

Which Version Do I Need?

Match the kit to your device connectors first, then choose how you want the sleeves to look.

Fm-NCK3 Solid ColorsTHIS PAGE
Choose this listing for combinations of individually sleeved wires in solid colors.
Choose this version for solid black sleeves mixed with black-and-blue and black-and-green braids.
Choose this version for solid black sleeves mixed with black-and-orange and black-and-white braids.

What's in the Box

Kit A · 1 × ATX 24‑pin, 1 × EPS 8‑pin, 2 × PCIe 8‑pinKit B · 1 × ATX 24‑pin, 1 × EPS 8‑pin, 2 × PCIe 6‑pinKit C · 1 × ATX 24‑pin, 1 × EPS 8‑pin, 1 × PCIe 8‑pin, 1 × PCIe 6‑pinKit D · 1 × ATX 24‑pin, 1 × EPS 8‑pin, 1 × PCIe 8‑pinKit E · 1 × ATX 24‑pin, 1 × EPS 8‑pin, 1 × PCIe 6‑pinKit F · 1 × ATX 24‑pin, 2 × EPS 8‑pin, 2 × PCIe 8‑pin, 2 × PCIe 6‑pinKit G · 1 × ATX 24‑pin, 1 × EPS 8‑pin, 2 × PCIe 8‑pin, 2 × PCIe 6‑pinKit H · 1 × ATX 24‑pin, 1 × EPS 8‑pin, 3 × PCIe 8‑pin

Each extension comes with two cable combs already installed.

White, sky blue, and blue color reference. Cable types and quantities follow the selected kit.

Installation & Use

1
Shut down the PC and unplug the power supply’s AC cord.
2
Leave the original PSU cables in place at the power supply. Disconnect their plugs at the motherboard or graphics card.
3
Connect each original lead to its matching extension. Route the extension and plug its other end into the corresponding device socket.
4
Align each latch and confirm that the connectors are fully seated before reconnecting AC power.

You need the original cables supplied with your PSU.

Use the connector latch as the reference for bend direction.

FAQ

Which kit has the 8-pin GPU extensions I need?

If your GPU uses only 8-pin sockets and your motherboard needs one EPS 8-pin extension, choose Kit D for one PCIe 8-pin lead, Kit A for two, or Kit H for three. Check the box list if you also need PCIe 6-pin leads or a second EPS lead.

Can I plug these cables directly into a modular PSU?

Never connect the extensions to the modular sockets on the PSU. Plug them into the device ends of the original PSU leads.

Can I use an EPS 8-pin extension on an 8-pin GPU socket?

Use the PCIe 8-pin (6+2) extension for the GPU. The EPS 8-pin (4+4) extension connects to the motherboard’s CPU power socket.

Does the kit include a 16-pin GPU extension?

The kit offers PCIe 6-pin and 8-pin extensions. It does not include a 12VHPWR or 12V-2x6 extension.

Notes
  • Because of the different display setting of each computer, the pictures and real objects will be slightly color different.
  • All cables have been assembled, please don't disassemble at will
    *If you need DIY adjustment, please pay attention to use special tools and not use too much force.
  • *The color of the comb is subject to the cable kit picture. If you need to change to another color combs please contact customer service.
  • In case of upgrading to the appearance and structure, or different batches of material, no further notice, the real object shall prevail.
  • The actual product content and quantity will be sent according to the kit option you selected.