Description
The FormulaMod Fm-NCK4 kit adds 300 mm of reach between your existing PSU cables and the power sockets on your motherboard and graphics card. Each wire is individually sleeved. Two cable combs keep the wires aligned. Pick the kit that matches the types and number of power sockets on your hardware.
Connect the extensions to the component ends of your original PSU cables.
Not compatible:
Check your motherboard and GPU connector types, counts, and latch directions before ordering.
| Series | Fm-NCK4 |
|---|---|
| Nominal cable length | 300 mm |
| Wire gauge | 18 AWG |
| Cable diameter | 3 mm |
| Construction | Braided sleeving over insulated wires |
| End connections | Male to female |
ATX means 24-pin (20+4), EPS means 8-pin (4+4), and PCIe 8-pin means 6+2. Each extension comes with two cable combs.
Kit H includes three PCIe 8-pin (6+2) GPU extensions, one ATX 24-pin extension, and one EPS 8-pin CPU extension.
Keep your original PSU cables in place. Connect each extension between the matching original cable and the motherboard or GPU.
The 180° bend goes toward the latch on the ATX and EPS connectors. On the PCIe GPU connectors, it goes away from the latch.