16-Pin 12VHPWR GPU Extension Cable, FormulaMod Fm-Y124P, 450 mm, Male to Female

FormulaMod · Fm-Y124P

450 mm 12VHPWR GPU extension cable

The FormulaMod Fm-Y124P is a 450 mm (17.7 in) male-to-female extension for an existing 16-pin (12+4) 12VHPWR GPU power cable. It adds reach between the original cable and the graphics card so you can route the cable through the case. Choose black or white sleeving, both with black connectors.

Fits
16-pin 12VHPWR GPU lead
Length
450 mm (17.7 in)
Power wire gauge
16 AWG
Ends
Straight male and female

Compatibility

Check both ends of your power connection before ordering.

  • ✓Existing cable: a 16-pin (12+4) 12VHPWR male plug at the graphics card end.
  • ✓Graphics card: a 16-pin (12+4) 12VHPWR power input.

Not compatible:

  • ✗PCIe 6-pin or 8-pin power connectors
  • ✗Legacy 12-pin power connectors without the four small signal positions

Check the instructions for your exact graphics card and power supply before adding an extension. Keep the existing power cable connected to the PSU.

Left: socket for your existing cable. Right: plug for the graphics card.

Design Highlights

Manufacturer illustration of power wire construction.

16 AWG tinned copper

The power wires have an insulating layer and a woven outer sleeve.

Sleeved wires with cable combs

Cable combs keep the sleeved wires aligned along the visible part of your cable run.

Key Specifications

Black SKUFm-Y124P-BKP124-BK-S-450
White SKUFm-Y124P-BKP124-WT-S-450
Cable length450 mm (17.7 in)
GPU endStraight 16-pin (12+4) 12VHPWR male plug
Existing cable endStraight 16-pin (12+4) 12VHPWR female socket
Power wires16 AWG tinned copper
Power wire sleevingIndividually woven, black or white
Connector housingsBlack on both versions

White version with black connector housings.

Which Version Do I Need?

Which connector is on your existing GPU power cable?

Fm-Y124P 16-pin extensionTHIS PAGE
Choose this extension when your existing GPU cable already ends in a 16-pin 12VHPWR plug and you need more reach.
Compare this adapter if your setup calls for three independent PCIe 8-pin leads and your graphics card and power supply manuals allow that configuration.
For a direct connection, compare this male-to-male cable if your ATX 3.0 power supply has a native 12VHPWR port. Confirm cable compatibility with your exact PSU model.

What's in the Box

1 × 12VHPWR extension cable in your selected color, with cable combs

Installation & Use

1
Shut down the PC and unplug the power cord.
2
Plan the cable route with room for a gentle bend at each end. Plug the GPU end of the existing cable into the extension’s female socket.
3
Plug the extension’s male end into the graphics card. Seat both connections fully and check that both latches lock.
4
Check that the side panel will clear the cable and that neither connector is under tension. Reconnect power after checking both connections.

You also need the existing 16-pin 12VHPWR GPU power cable specified for your hardware.

FAQ

Does this cable plug directly into a modular power supply?

Use it at the graphics card end of the existing power cable. The extension’s female socket receives the existing cable, and its male plug connects to the graphics card.

Can I connect it to a PCIe 8-pin power lead?

This extension accepts a 16-pin (12+4) 12VHPWR plug. PCIe 8-pin plugs use a different connector.

How do I check my graphics card’s power connector?

Look up the power input for your exact card model in its manual. Check for a 16-pin (12+4) 12VHPWR input and follow the power supply and cabling instructions for that card.

How long is the extension cable?

The extension is 450 mm long, or about 17.7 inches.

Notes
  • If you reposition the cable combs, slide them gently to avoid damaging the small signal wires.