FormulaMod · Fm-N24P

ATX 24-pin motherboard power extension cable

The FormulaMod Fm-N24P adds reach between your power supply’s existing ATX 24-pin cable and the motherboard’s main power socket. The cable is pre-bent toward the motherboard connector’s latch to guide the wiring back toward that side. Two preinstalled cable combs keep the sleeved wires aligned along the bend.

Fits
ATX 24-pin main power
Wire gauge
18 AWG
Length options
200–1,000 mm

Fits & Use With

  • ✓Motherboard with an ATX 24-pin main power socket
  • ✓Existing ATX 24-pin motherboard cable from your PSU

Before ordering, check which side the motherboard socket latch is on and make sure the pre-bend points in the direction you want to route the cable.

Key Specifications

ModelFm-N24P
Connector endsATX 24-pin on both ends
Wire gauge18 AWG
Sleeved wire diameter3 mm per wire
Cable lengthsChoose a length in the product options.
Factory bend180° toward the latch on the motherboard plug
Color optionsSolid and two-tone

What's in the Box

1 × ATX 24-pin extension cable2 × preinstalled round cable combs

Installation & Use

1
Shut down the PC and unplug AC power.
2
Disconnect the existing ATX 24-pin cable from the motherboard and connect it to the matching end of the extension.
3
Plug the other end of the extension into the motherboard’s 24-pin main power socket and check that the latch is seated.

FAQ

Where does this 24-pin extension plug in?

Connect it between your existing PSU motherboard cable and the motherboard’s ATX 24-pin socket. Keep the original PSU cable connected at the power supply.

Does the cable come with combs?

Yes. Two round cable combs are already installed.

Notes
  • Because of the different display setting of each computer, the pictures and real objects will be slightly color different.
  • In case of upgrading to the appearance and structure, or different batches of material, no further notice, the real object shall prevail.