Description
The FormulaMod Fm-TBYK is a manual 5V 3-pin ARGB controller for PC fan lighting and LED strips with a matching plug. It draws power from a 4-pin Molex connector on your PC power supply. Use the buttons on the cable to change lighting effects even if your motherboard has no ARGB header.
Not compatible:
Before ordering, check that the blocked hole on your lighting plug lines up with the missing pin on the controller. A fan’s motor uses its separate power and speed-control cable.
Use the two Mode buttons to step through lighting effects. The middle Speed button adjusts the effect speed.
The D-shaped Molex plug connects to a peripheral power lead from your PC power supply. The smaller connector on the controller is the lighting output.
| Model (SKU) | Fm-TBYK |
|---|---|
| Lighting output | One 5V 3-pin ARGB connector with a keyed gap |
| Power input | D-type 4-pin Molex peripheral connector |
| Controls | Three buttons on the inline controller |
| Mode memory | Retains the selected lighting mode after power-off |
Choose by how you want to control the lighting.
You’ll need a free 4-pin Molex power connector and a light strip or fan with a matching 5V 3-pin ARGB lighting lead.
The inline buttons control lighting directly. A 4-pin Molex connection to your PC power supply powers the controller.
Use a matching 12V RGB controller for those lights. The Fm-TBYK supports 5V 3-pin ARGB lighting.
It controls the fan’s lighting. Connect the fan’s motor cable separately for power and speed control.
Yes. It retains the selected lighting mode when power is disconnected.