Description
This FormulaMod power extension cable adds 300 mm of reach between your PC power supply’s existing peripheral lead and the device it powers. Choose 15-pin SATA power for a SATA drive or 4-pin Molex for a matching D-type peripheral input. Each option includes one sleeved male-to-female cable.
Match the connector on your existing PSU cable to the power input on your device.
Plug the extension into the device end of your original PSU cable. Never plug it directly into a modular PSU socket.
A braided sleeve covers the insulation around each 18 AWG conductor.
Choose the connector that matches your device, then select a sleeve color. Both connector options are 300 mm long.
| SKU prefixes | Fm-Sata (SATA), Fm-Molex (Molex) |
|---|---|
| Length | 300 mm |
| Wire gauge | 18 AWG |
| Sleeve | Braided |
| Cable ends | Male to female |
| SATA option | 15-pin SATA power to 15-pin SATA power |
| Molex option | 4-pin D-type peripheral power to 4-pin D-type peripheral power |
| Sleeve colors | Black, White, Gray, Red, Pink, Blue, Sky Blue, Green, Purple, Orange, Silver |
Check which power connection you need to extend.
The connector and sleeve color follow the option you select.
You need the original PSU cable with a matching SATA or 4-pin Molex power plug. A SATA drive still uses its separate data connection.
Select SATA for a 15-pin SATA power connection or MOLEX for a 4-pin D-type peripheral power connection. Both are 300 mm long.
It extends the SATA power connection only. Keep your separate SATA data cable connected to the drive.
Each version has the same connector type at both ends. Choose the version that matches your existing power lead and device.
Each selection includes one assembled cable in the connector type and sleeve color you choose.
Connect it to the matching plug on the device end of your original PSU cable.