G1/4 360° Rotary Fitting, Male to Female – Granzon GD-X

Granzon · GD-X

G1/4 360° rotary adapter for custom PC water cooling

The Granzon GD-X is a brass G1/4 male-to-female adapter for custom PC water cooling. Its single joint rotates through 360° around the base and tilts the female end up to 41° from center. Use it to line up a separate tube fitting with the direction you want your tubing to run.

Fits
G1/4 threads
Rotation
360°
Tilt
41° from center
Body
Brass

Use With

For custom loops without aluminum in the coolant path.

  • ✓A G1/4 female port for the adapter’s male base
  • ✓A G1/4 male fitting for the adapter’s pivoting female end

Choose a separate tube fitting that matches your tubing type and diameter.

Design Highlights

Aim the tube fitting

Turn the joint toward your tubing run, then tilt the head to line up the connection. The joint uses a built-in four-layer nitrile seal.

Choose black or silver

Both finishes use the same G1/4 male-to-female connection. Each pack contains one adapter in the color you choose.

Key Specifications

ModelGD-X
Body materialBrass
Base threadG1/4 male
Pivoting end threadG1/4 female
Rotation around base360°
Tilt from centerUp to 41° in any direction
Total tilt sweep82° from side to side
SealBuilt-in four-layer nitrile seal
ColorsBlack or silver

The 41° angle is measured from the upright position.

Which Version Do I Need?

Granzon GD-XTHIS PAGE
Choose the single-joint adapter when you need one fitting with adjustable tilt.
Choose a fixed 45° or 90° bend when you know the bend angle and only need to rotate its direction.
Choose the double-joint adapter if the outlet needs to adjust all the way to a right angle.
Select the GD-X option on the four-pack page if you need four of this same model.

What's in the Box

1 × Granzon GD-X rotary adapter in your selected color

Installation & Use

1
Thread the adapter’s G1/4 male base into a G1/4 female port.
2
Thread a matching G1/4 male tube fitting into the adapter’s female end.
3
Rotate and tilt the joint to line up the tube, then connect it without forcing it into position.
4
Leak-test the loop with only the pump powered. Check the joints before powering the rest of the PC.

You’ll also need tubing and a separate G1/4 tube fitting matched to it.

Example routing with separate tube fittings.

FAQ

What does 360° swivel mean on the GD-X?

The joint can turn in any direction around the base. The head can tilt up to 41° from center, for 82° of travel from one side to the other.

Which end screws into my component?

The G1/4 male base screws into a G1/4 female port. The pivoting G1/4 female end accepts a G1/4 male fitting.

Does tubing connect directly to the adapter?

Use a separate G1/4 male tube fitting sized for your tubing.

Do I get both colors?

Each pack includes one GD-X adapter in your choice of black or silver.

Notes
  • Not responsible for any hardware damage. Use at your own risk.