Granzon · GC-AS-GR701
Distro plate kit for a CPU and single-GPU loop
The Granzon GC-AS-GR701 is a custom water cooling kit for the ASUS ROG Hyperion GR701 case. Its acrylic distribution plate gives the radiators, CPU block, and one GPU block dedicated coolant connections. The kit pairs a digital-display DDC pump with two 360 mm radiators and rigid tubing components for that layout.
Fits
ASUS ROG Hyperion GR701
Compatibility
Case fit and water block matching
The distribution plate mounts to the chassis frame beside the motherboard. Before ordering, send us your exact CPU and graphics card model so we can match both water blocks to your hardware.
Manufacturer’s example build in the GR701.
Design Highlights
Double-layer acrylic waterway
The PMMA plate routes coolant through two layers of channels. The inlet and outlet have brass reinforcement, and an aluminum alloy cover frames the plate.
Manufacturer’s example routing with one radiator at the top and one at the front.
Hard-tube layout for two radiators
Dedicated supply and return ports let you route the CPU block, GPU block, and radiators through the plate. The kit uses black pre-bent copper tubing and fittings sized for 14 mm OD rigid tubing.
Manufacturer’s pump mounting diagram. A marks the mounting screws, B the GFM III pump, and C the distribution plate.
Plate-mounted DDC pump
The GFM III attaches directly to the distribution plate. Its display shows a flow readout, and the pump supports manual or automatic speed adjustment.
Key Specifications
| Model | Granzon GC-AS-GR701 |
|---|
| Kit SKU | GC-AS-GR701_Kits |
|---|
| Plate size (L × W × T) | 398 × 128 × 30 mm, plate only |
|---|
| Plate material | PMMA acrylic with an aluminum alloy cover |
|---|
| Port thread | G1/4 |
|---|
| Tube outside diameter | 14 mm, rigid |
|---|
| Pump | Granzon GFM III DDC with digital display |
|---|
| Pump connections | 4-pin Molex power and 4-pin PWM control |
|---|
| Plate lighting | 5V 3-pin addressable RGB (RBW) |
|---|
| Radiators | 2 × 360 mm |
|---|
| Fans | 7 × 120 mm PWM |
|---|
Manufacturer’s drawing. Plate dimensions are in millimeters.
Which Version Do I Need?
Choose by the parts you need for your GR701 build.
Granzon GC-AS-GR701 KitTHIS PAGE
Choose this kit for a single-GPU build that needs the plate, pump, water blocks, radiators, and hard-tube parts.
Choose the same Granzon plate with or without its display pump if you are sourcing the rest of the loop separately.
Choose this Bykski plate with or without a pump.
Choose the Barrow Aurora plate if you want its lighting setup with or without a manual controller.
What's in the Box
1 × GC-AS-GR701 distro plate1 × GFM III digital-display DDC pump1 × CPU water block1 × GPU water block2 × 360 mm radiators7 × 120 mm PWM fans6 × black pre-bent 14 mm OD copper tubes12 × 14 mm OD hard-tube fittings7 × 90° fittings7 × 7.5 mm extension fittings3 × 15 mm extension fittings4 × 40 mm extension fittings1 × telescoping extension fitting2 × ultra-thin plugs1 × vent valve1 × retractable water valve1 × lighting hub
Confirm your CPU and GPU block selection with us before ordering.
Installation & Use
1With the system powered off, follow the manufacturer’s mounting diagram to attach the pump to the plate. Secure the plate to the GR701 chassis frame.
2Mount the top and front radiators and their fans. Fit the matched CPU and GPU water blocks using the instructions for those blocks.
3Measure and trim the pre-bent tubes to suit your hardware. Follow the numbered port diagram for radiator and block connections, and fit the vent valve and drain valve at their designated ports.
4Connect the pump’s Molex power lead and PWM control lead. Use matching 5V 3-pin ARGB connections for the lighting.
5Fill the loop with coolant. Keep coolant flowing to the pump and check every fitting for leaks with only the pump powered before starting the PC.
You supply the GR701 case, your PC hardware, and coolant for a custom loop.
Manufacturer’s port map. 1 to radiators, 2 return from radiators, 3 vent, 4 return from CPU block, 5 to CPU block, 6 return from GPU block, 7 to GPU block, 8 adjustment module screw holes, 9 drain.
FAQ
What do I need to confirm for a GR701 water cooling build?
Check that your case is the ASUS ROG Hyperion GR701. Send us the exact CPU and graphics card model before ordering so we can match the two water blocks.
Does the kit come with the pump and radiators?
Yes. The kit includes one GFM III digital-display DDC pump, two 360 mm radiators, and seven 120 mm PWM fans.
What fittings and tubing does the plate use?
The plate uses G1/4 threads. The included hard-tube fittings fit 14 mm OD rigid tubing.
What lighting header do I need?
Use a 5V 3-pin ARGB connection for the plate lighting. Keep it off 12V 4-pin RGB headers.
What do I need to fill the loop?
Supply your own coolant for a custom PC loop. Fill it before applying power to the pump.
Notes- Contact us before ordering to confirm whether the CPU port adjustment module comes with this kit.
- The products such as case, RAM block, motherboard etc. outside the list, only for reference and display.
- The kit's actual installation results will vary depending on program and case, builder ideas, etc.
- Please pay attention to this distro plate is only compatible with corresponding case.
- This kit does not contain any coolant. Due to strict restrictions on transport liquids.
- Please contact the seller and provide the specific info of your graphics card and CPU.
- The products in Bykski's pictures of the build, do not represent the kit list.
- Some of the products in the pictures are Bykski high-end products, or modified for a more beautiful build, which will be different from the products mentioned in the kit list.
- Please refer to the kit list for the included parts.
- If you want the exact same appearance as the picture, please contact the seller.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc..
- If not notified in time, the Bykski's latest real object and the newest list shall prevail.