Granzon · GFMB

DDC pump with a built-in reservoir and digital display

The Granzon GFMB is a DDC-style pump for custom PC water cooling. It circulates coolant through G1/4 side ports and has a built-in 43 mL reservoir. A front display shows pump speed, and the threaded pump top accepts a matching cylinder reservoir when you need more coolant capacity.

Fits
CT-F60-AL-V2 reservoir
Built-in reservoir
43 mL
Max. flow
700 L/h
Max. head
6 m

Fits and Connections

Use the GFMB in a custom PC liquid cooling loop.

  • ✓Bykski CT-F60-AL-V2 cylinder reservoir for a direct top mount
  • ✓G1/4 fittings for the pump’s two side ports
  • ✓12 V DC 4-pin Molex from the power supply, with a motherboard PWM header for automatic speed control

The center opening on top and the upper side port are inlets. The lower side port is the outlet.

Design Highlights

Read pump speed on the front display

The 2-inch display shows real-time speed, voltage, and pump load. It estimates flow from the current pump speed, and the estimate depends on loop resistance.

Set speed in 100 RPM steps in manual mode, or choose automatic mode to follow the motherboard’s PWM signal.

43 mL inside the pump housing

The GFMB integrates a small reservoir into the pump module. Use the pump-only option when you want to keep the space above the pump clear.

Reservoir lengths from left to right are 200, 150, 100, and 60 mm.

Add coolant capacity with a cylinder reservoir

The CT-F60-AL-V2 threads onto the pump top. Choose the reservoir length that leaves room in your case for mounting and tubing.

Key Specifications

ModelGFMB
Pump typeDDC-style
Pump coreCP-D3PB-X
Pump housingPOM
Pump front (W × H)68.5 × 84 mm, without add-on reservoir
Pump net weight575 g
Built-in reservoir43 mL
Add-on reservoir length60, 100, 150, or 200 mm
Add-on reservoir tubeClear acrylic
Add-on reservoir cap diameter66 mm
Pump side port threadG1/4
Pump ports2 inlets, 1 outlet
Speed1,800–4,800 RPM
Max. flow700 L/h
Max. head6 m
Power12 V DC via 4-pin Molex (D-type)
Speed controlManual adjustment or motherboard PWM in automatic mode
Front display2-inch digital display

Manufacturer drawing of the pump without the add-on reservoir. Width and height are in millimeters.

Which Version Do I Need?

Granzon GFMB pump only or comboTHIS PAGE
Choose pump only to use the built-in reservoir. For more capacity, order the pump with a 60, 100, 150, or 200 mm cylinder.
Choose this add-on if you already have a GFMB and want to buy the cylinder reservoir on its own.

What's in the Box

1 × GFMB pump with housing and displayMounting screwsCombos include 1 × CT-F60-AL-V2 reservoir in the selected length

Installation & Use

1
Check case clearance for the pump, fittings, and optional reservoir. Secure the pump using the mounting hardware appropriate for your case.
2
If you selected the cylinder reservoir, seat its O-ring and thread the reservoir onto the top of the pump.
3
Connect the loop with G1/4 fittings that match your tubing. Route the return to an inlet and the outlet line to the lower side port. Seal unused openings.
4
Connect the 4-pin Molex plug to 12 V DC power. To use automatic speed control, connect the PWM lead to the motherboard and select automatic mode.
5
Fill and prime the pump before running it. Leak-test the loop with the rest of the system unpowered.

A complete loop also needs a radiator, water block, tubing, matching G1/4 fittings, stop plugs, and coolant.

Manufacturer example of a bracket mount inside a case.

FAQ

Can I use the GFMB without the cylinder reservoir?

Yes. The pump-only option has a built-in 43 mL reservoir.

Does the display measure coolant flow?

The display estimates flow from the current pump speed. Loop resistance affects how close that estimate is to actual flow.

How do I power the pump and control its speed?

Use a 12 V DC 4-pin Molex connection for power. Use the motherboard PWM header for automatic speed control, or set the speed in 100 RPM steps in manual mode.

How large is the GFMB before adding a reservoir?

The pump’s front face is 68.5 mm wide and 84 mm high. The listed 60, 100, 150, and 200 mm lengths are for the cylinder reservoir itself.

Notes
  • Not responsible for any hardware damage. Use at your own risk.
  • 1. Pay attention to the voltage requirements of the display power supply, use Molex(D-type) 4Pin
    Please do not connect to the wrong voltage, otherwise the screen will be destroyed.
  • 2. In case of upgrading to the appearance and structure, no further notice, the real object shall prevail