CPU Water Block with Display for Intel or AMD – Granzon GAISC / GAMSC

Granzon · GAISC / GAMSC

CPU water block with an HDMI display

The Granzon GAISC for Intel and GAMSC for AMD are CPU water blocks for custom liquid cooling loops. Each has a 2.9-inch LCD that takes video from your graphics card over HDMI and draws power from a separate USB connection. Use it as a second screen for AIDA64 sensor readings, PC video, or an animated wallpaper.

Fits
Intel GAISC / AMD GAMSC
Display
2.9-inch TFT LCD
Resolution
1440 × 1440 pixels
Loop fittings
G1/4

Compatibility

Match the CPU socket to the version you order.

  • ✓Intel GAISC — LGA 1700, LGA 1200, LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 2011, LGA 2066
  • ✓AMD GAMSC — AM5, AM4

Check your motherboard socket before ordering. Allow room around the socket for the block, fittings, and display cables.

GAMSC manufacturer drawing. Measurements are in millimeters.

Design Highlights

Separate connections for video and power

Connect the screen to an available HDMI output on your graphics card and to a powered USB port on your motherboard or case. Buttons on the block adjust brightness and switch the screen on or off.

Marked coolant inlet and outlet

The top-facing ports are spaced 33.56 mm center to center. Use the down triangle for the inlet and the up triangle for the outlet. Check the marks on your block before routing the tubing.

Key Specifications

ModelGAISC (Intel) or GAMSC (AMD)
Display2.9-inch TFT LCD, 1440 × 1440 pixels
Video inputHDMI
Screen powerUSB (Micro-USB on GAISC)
Cold plateCopper
Outer frameAluminum alloy
Port threadG1/4
Top port spacing33.56 mm center to center
GAISC (L × W × T)94.00 × 90.00 × 41.20 mm
GAMSC (L × W × T)120.00 × 87.00 × 41.09 mm
Net weightGAISC 483.5 g / GAMSC 657.5 g

GAISC manufacturer drawing. Measurements are in millimeters.

Which Version Do I Need?

Granzon GAISC / GAMSCTHIS PAGE
Choose this model for an HDMI second screen that can display an AIDA64 SensorPanel.
Choose this model if you want a dedicated digital temperature gauge.

What's in the Box

1 × CPU water block with LCDMounting hardware setCPU mounting backplate

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Shut down the PC and remove the existing CPU cooler. Clean the CPU and remove any protective film from the block’s cold plate.
2
Apply your own thermal paste. Fit the mounting hardware for your socket and tighten the screws diagonally. For GAMSC on AM5, keep the motherboard’s preinstalled backplate in place and set the included backplate aside.
3
Connect the marked inlet and outlet with G1/4 fittings. Leak-test the loop before powering on the PC.
4
Connect the LCD to HDMI for video and USB for power. In Windows, select Extend in the display settings to use it as a second screen.

For the cooling loop, you also need a pump, radiator, G1/4 fittings, tubing, and coolant.

GAISC manufacturer illustration for a mount that uses a separate backplate.

FAQ

Can I use this LCD with AIDA64?

Yes. Extend your Windows desktop to the block’s HDMI screen. In AIDA64, enable SensorPanel and pin it to that screen to show readings such as CPU temperature and GPU load.

Which version fits an AM5 motherboard?

Choose GAMSC, the AMD version. It fits AM5 and AM4.

Does the display need both HDMI and USB?

Yes. HDMI carries the picture from your graphics card, and a separate USB connection powers the display.

How large is the water block?

GAISC measures 94.00 × 90.00 × 41.20 mm. GAMSC measures 120.00 × 87.00 × 41.09 mm. Measurements are length × width × thickness.

Which fittings do I need?

Use G1/4 fittings. Connect the supply to the port marked with the down triangle and the return to the port marked with the up triangle.

Notes
  • Please pay attention to the inlet/outlet during installation. The wrong direction during installation will affect the heat dissipation performance. Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT include English installation instructions.
  • Not responsible for any damage caused by or when using this product. Please use at your own risk.
  • In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.