Description
The Granzon GBN-AS4080STRIX Full Armor is a full-cover water block for supported ASUS TUF Gaming and ROG Strix GeForce RTX 4080 16GB cards. It replaces the stock cooler and transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop.
Fits the listed ASUS TUF Gaming and ROG Strix custom PCBs.
Not compatible:
Before ordering, verify your exact ASUS model number and match the entire PCB layout to Granzon’s compatibility information.
The copper cold plate cools the GPU core, memory, and voltage regulators. Coolant passes through 0.3 mm jet microchannels.
Use the side terminal to connect the block to your loop. In Granzon’s port diagram, A is the inlet and B is the outlet.
The slotted front armor covers the block, and the included backplate sits behind the PCB. Both aluminum pieces stay outside the coolant path.
A 12 mm one-piece aluminum bracket supports the card at the I/O end.
| Model | GBN-AS4080STRIX |
|---|---|
| Cold plate | Copper |
| Cold plate size (L × W) | 218 × 134 mm |
| Front armor and backplate | Black aluminum alloy, passive backplate |
| Microchannel width | 0.3 mm |
| Port thread | G1/4 |
| Flow direction | A inlet, B outlet |
| Overall size (L × W × T) | 245.60 × 136.94 × 37.40 mm |
| One-piece I/O bracket thickness | 12 mm |
| Net weight | Approx. 1.97 kg |
| Lighting | None |
Start with the exact model on your graphics card label, then check the PCB against the listing for that block.
Supply your own G1/4 plugs for any unused ports.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
You’ll also need a pump, radiator, G1/4 fittings, tubing, and coolant. The optional Bykski vertical mounting bracket is sold separately.
Granzon lists the ASUS TUF Gaming GeForce RTX 4080. For the OC edition, confirm your exact card model and PCB layout before ordering.
Check the Bykski N-AS5080TUF-X listing for your exact TUF Gaming GeForce RTX 5080 and PCB.
Use G1/4 fittings that match your tubing. Connect the inlet at A and the outlet at B.
This block has no built-in lighting and needs no RGB connection.