ASUS TUF Gaming / ROG Strix RTX 4080 Water Block – Granzon GBN-AS4080STRIX Full Armor

Granzon · GBN-AS4080STRIX

Full Armor water block for ASUS RTX 4080

The Granzon GBN-AS4080STRIX Full Armor is a full-cover water block for supported ASUS TUF Gaming and ROG Strix GeForce RTX 4080 16GB cards. It replaces the stock cooler and transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop.

Fits
ASUS TUF Gaming / ROG Strix RTX 4080
Cold plate
Copper
Ports
G1/4
Backplate
Passive aluminum

Compatibility

Fits the listed ASUS TUF Gaming and ROG Strix custom PCBs.

  • ✓ASUS TUF Gaming GeForce RTX 4080 16GB (TUF-RTX4080-16G-GAMING)
  • ✓ASUS ROG Strix GeForce RTX 4080 16GB (ROG-STRIX-RTX4080-16G-GAMING)

Not compatible:

  • ✗ASUS TUF Gaming GeForce RTX 5080

Before ordering, verify your exact ASUS model number and match the entire PCB layout to Granzon’s compatibility information.

ASUS ROG Strix GeForce RTX 4080 16GB OC shown with its stock cooler.

Design Highlights

One cold plate for the GPU, memory, and VRM

The copper cold plate cools the GPU core, memory, and voltage regulators. Coolant passes through 0.3 mm jet microchannels.

Use the side terminal to connect the block to your loop. In Granzon’s port diagram, A is the inlet and B is the outlet.

Aluminum front armor and passive backplate

The slotted front armor covers the block, and the included backplate sits behind the PCB. Both aluminum pieces stay outside the coolant path.

A 12 mm one-piece aluminum bracket supports the card at the I/O end.

Key Specifications

ModelGBN-AS4080STRIX
Cold plateCopper
Cold plate size (L × W)218 × 134 mm
Front armor and backplateBlack aluminum alloy, passive backplate
Microchannel width0.3 mm
Port threadG1/4
Flow directionA inlet, B outlet
Overall size (L × W × T)245.60 × 136.94 × 37.40 mm
One-piece I/O bracket thickness12 mm
Net weightApprox. 1.97 kg
LightingNone

Granzon’s overall dimensions are in millimeters.

Which Version Do I Need?

Start with the exact model on your graphics card label, then check the PCB against the listing for that block.

Granzon GBN-AS4080STRIXTHIS PAGE
Choose this block for one of the ASUS TUF Gaming or ROG Strix RTX 4080 16GB models listed above.
For supported ASUS TUF Gaming and ROG Strix RTX 4090 24GB PCBs. Check its compatibility list for your exact model.
For MSI RTX 4080 Gaming X Trio, SUPRIM, and SUPRIM X cards with the matching PCB.
For supported ASUS TUF Gaming GeForce RTX 5080 cards. Check its compatibility list for your exact model.

What's in the Box

1 × full-cover GPU water block1 × front armor plate1 × passive backplate1 × mounting hardware setThermal pads

Supply your own G1/4 plugs for any unused ports.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the system and remove the graphics card. Take off the stock cooler and backplate, then clean the old thermal material from the GPU, memory, and power components.
2
Place the supplied thermal pads at the points specified for your PCB. Apply a thin layer of your own thermal paste to the GPU die.
3
Align the water block and included backplate with the PCB. Secure them with the supplied hardware, tightening gradually and evenly.
4
Connect the loop using G1/4 fittings, with coolant flowing into A and out of B. Leak-test the loop before powering the card.

You’ll also need a pump, radiator, G1/4 fittings, tubing, and coolant. The optional Bykski vertical mounting bracket is sold separately.

Granzon’s installation illustration shows the order of the block, PCB, and backplate.

FAQ

Will this fit my ASUS TUF RTX 4080 OC?

Granzon lists the ASUS TUF Gaming GeForce RTX 4080. For the OC edition, confirm your exact card model and PCB layout before ordering.

Which water block should I use for an ASUS TUF RTX 5080?

Check the Bykski N-AS5080TUF-X listing for your exact TUF Gaming GeForce RTX 5080 and PCB.

Which fittings do I need?

Use G1/4 fittings that match your tubing. Connect the inlet at A and the outlet at B.

Does this block have RGB lighting?

This block has no built-in lighting and needs no RGB connection.

Notes
  • 6. Bykski reserves the right to upgrade/adjust the product, in case of upgrading to the appearance and structure, no further notice, the real object shall prevail.