Colorful iGame RTX 4080 / 4070 Ti Water Block & Backplate – Granzon GBN-IG4080VXOC Full Armor

Granzon · GBN-IG4080VXOC

Full-cover GPU water block for Colorful iGame

The Granzon GBN-IG4080VXOC is a full-cover GPU water block and backplate for specific Colorful iGame cards, including the GeForce RTX 4080 Vulcan OC. It replaces the stock cooler to transfer heat from the GPU core, memory, and voltage regulators into a custom liquid cooling loop.

Fits
Select Colorful iGame RTX 4080 / 4070 Ti
Cold plate
Copper
Ports
G1/4
Microchannels
0.3 mm

Compatibility

Granzon lists these Colorful PCB layouts for this block.

  • ✓Colorful iGame GeForce RTX 4080 Vulcan OC
  • ✓Colorful iGame GeForce RTX 4080 Neptune OC
  • ✓Colorful iGame GeForce RTX 4080 Advanced OC
  • ✓Colorful iGame GeForce RTX 4070 Ti Vulcan OC

Before ordering, confirm your exact card model and compare its PCB revision and layout with Granzon’s compatibility information.

Colorful’s RTX 4080 Vulcan OC shown with its original cooler.

Design Highlights

One cold plate for the GPU, memory, and VRM

The copper plate has dedicated contact surfaces for the GPU core, memory, and voltage regulators. A 0.3 mm jet microchannel array carries coolant across the core area.

Aluminum armor and a separate backplate

The black aluminum alloy front armor covers the block. The slotted backplate fastens behind the PCB.

One-piece I/O bracket

The aluminum I/O bracket is 12 mm thick. The assembly leaves access to the card’s OC button where fitted.

Key Specifications

Model (SKU)GBN-IG4080VXOC
Cold plateCopper
Exterior armorBlack aluminum alloy
Cooling coverageGPU core, memory, and VRM
Jet microchannels0.3 mm
Port threadG1/4
Side portsA inlet, B outlet
Block body dimensions (L × W × T, as shown)262.55 × 134.00 × 29.70 mm
BackplateIncluded, passive
LightingNone

Manufacturer drawing. Measurements are in millimeters. The I/O bracket extends beyond the dimensions shown.

Which Version Do I Need?

Use the full card name to choose a water block. Vulcan and Neptune names span multiple GPU models.

Granzon GBN-IG4080VXOCTHIS PAGE
For the Colorful iGame RTX 4080 and RTX 4070 Ti PCB layouts listed above.
For the Colorful iGame GeForce RTX 4080 16GB Ultra W OC.
Check this block for a Colorful iGame GeForce RTX 4090 Vulcan OC or Neptune OC.
Check this block for a GIGABYTE GeForce RTX 4090 WINDFORCE 24G.
For the GIGABYTE GeForce RTX 4090 GAMING OC 24G or AORUS GeForce RTX 4090 MASTER 24G.
For the MSI GeForce RTX 4070 Ti VENTUS 3X 12G OC.

What's in the Box

1 × full-cover GPU water block1 × front armor plate1 × backplate1 × mounting hardware setThermal pads

Supply your own G1/4 plugs for any unused ports.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC, remove the graphics card, and take off its original cooler and backplate.
2
Clean off the old thermal materials. Verify the PCB layout and mounting points against the block.
3
Apply the included pads at the specified memory and voltage regulator contact points for your PCB. Apply your own thermal paste to the GPU die.
4
Align the cooler and backplate on either side of the PCB. Fit the supplied hardware and tighten evenly.
5
Connect your G1/4 fittings and tubing with A as the inlet and B as the outlet. Seal any unused ports.
6
Fill the loop and check for leaks before powering the graphics card.

For the custom loop, supply a pump, radiator, G1/4 tube fittings, compatible tubing, and coolant.

Granzon’s assembly diagram. Verify pad placement for your exact PCB.

FAQ

How do I tell whether my Colorful card fits?

Match the exact card name to the compatibility list, then check the PCB revision and layout before ordering.

What is the water block made of?

The cold plate is copper and the black exterior armor is aluminum alloy.

Which fittings should I use?

Use G1/4 fittings. Granzon marks port A as the inlet and port B as the outlet.

Where is the bracket, and what do I need for vertical mounting?

The block’s I/O bracket sits at the card’s display outputs. Bykski shows a separate vertical mounting bracket as an optional purchase.

Does this Granzon block have RGB lighting?

The GBN-IG4080VXOC has no built-in lighting.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • The product does NOT come with English instructions. Please see the product gallery images for the install guide if available.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.