MSI GeForce RTX 4080 16GB Water Block for SUPRIM X, SUPRIM & GAMING X TRIO | Granzon GBN-MS4080TRIO

Granzon · GBN-MS4080TRIO

Full-cover water block for select MSI GeForce RTX 4080 cards

The Granzon GBN-MS4080TRIO replaces the stock cooler on supported MSI GeForce RTX 4080 16GB cards for use in a custom liquid cooling loop. Its nickel-plated copper cold plate cools the GPU core, memory, and voltage regulators. The block uses G1/4 fittings and comes with front and rear armor plates.

Fits
MSI RTX 4080 SUPRIM X and other listed models
Coverage
GPU core, memory, and VRM
Fitting thread
G1/4

Compatibility

Granzon lists these MSI card models for this block.

  • ✓MSI GeForce RTX 4080 16GB SUPRIM X
  • ✓MSI GeForce RTX 4080 16GB SUPRIM
  • ✓MSI GeForce RTX 4080 16GB GAMING X TRIO

Before ordering, confirm the full model name and PCB layout. If you are unsure which PCB your card uses, ask support to verify it.

MSI GeForce RTX 4080 16GB SUPRIM X with its stock cooler.

Key Specifications

ModelGBN-MS4080TRIO
Cold plateNickel-plated copper
Outer armorBlack aluminum, outside the coolant path
Cooling coverageGPU core, memory, and voltage regulators
Port threadG1/4 inlet and outlet
Overall size (L × W × T)294.44 × 141.73 × 27.1 mm
Microchannel width0.3 mm

What's in the Box

1 × full-cover GPU water block1 × front armor plate1 × backplate2 × stop fittings1 × mounting hardware setThermal pads

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Remove the stock cooler and clean the old paste and pad residue from the card.
2
Fit thermal pads at the contact points specified for your PCB and apply your own thermal paste to the GPU die.
3
Align the block, PCB, and backplate, then tighten the mounting hardware evenly.
4
Connect the block with G1/4 fittings and leak-test the loop before powering the graphics card.

You also need a pump, radiator, tubing, coolant, and G1/4 loop fittings.

Exploded view of the block and backplate assembly.

FAQ

Does it fit the MSI GeForce RTX 4080 16GB SUPRIM X?

Yes, when your card has the PCB layout listed for the GBN-MS4080TRIO. Verify the PCB before ordering.

What fittings does the block take?

Use G1/4 fittings at the inlet and outlet.

Which parts of the graphics card does it cool?

The full-cover cold plate cools the GPU die, memory, and voltage regulators.

Notes
  • 1. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • 2. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • 3. Not responsible for any damage caused by or when using this product. Please use it at your own risk.