PNY RTX 4080 16GB XLR8 Gaming VERTO EPIC-X RGB OC Full-Cover Water Block, Granzon GBN-PNY4080VERTO

Granzon · GBN-PNY4080VERTO

Full-armor water block for PNY RTX 4080 VERTO OC

The Granzon GBN-PNY4080VERTO is a full-cover GPU water block for the PNY GeForce RTX 4080 16GB XLR8 Gaming VERTO EPIC-X RGB OC. It replaces the stock cooler to cool the GPU core, memory, and voltage regulators in a custom liquid cooling loop. Aluminum armor covers both sides of the card.

Fits
PNY RTX 4080 XLR8 VERTO OC
Cold plate
Copper
Microchannels
0.3 mm
Lighting
None

Compatibility

Confirmed graphics card

  • ✓PNY GeForce RTX 4080 16GB XLR8 Gaming VERTO EPIC-X RGB OC (VCG408016TFXXPB1-O)

Before ordering, verify the full PNY part number on your card and confirm that its PCB layout matches the block. Ask FormulaMod to confirm the fit if you see a different layout or part number.

Design Highlights

Aluminum armor on both sides

The black front armor and backplate have diagonal cutouts and sit outside the coolant path.

0.3 mm jet microchannels

Coolant runs through the microchannels in the copper cold plate, carrying heat into the loop.

Side-mounted inlet and outlet

The inlet and outlet sit on the side terminal. Check the direction before you route your tubing.

Key Specifications

ModelGBN-PNY4080VERTO
Cooling coverageGPU core, memory, and voltage regulators
Cold plateCopper
Copper plate (L × W)212.6 × 118.7 mm
Jet microchannel width0.3 mm
Front armor and backplateBlack aluminum alloy
Coolant portsSide-mounted inlet and outlet
Water block (L × W × T)238.34 × 124.50 × 30.45 mm
LightingNone

Manufacturer’s dimensions in millimeters.

Which Version Do I Need?

Start with the exact model on your graphics card label.

GBN-PNY4080VERTOTHIS PAGE
Choose this for the listed PNY OC card if you want aluminum armor on both sides and a block without lighting.
For the listed PNY OC card, choose this version if you want a clear acrylic top and 5V ARGB lighting.
Choose this dedicated armor block for an NVIDIA GeForce RTX 4080 Founders Edition.

What's in the Box

1 × full-cover GPU water block1 × front armor plate1 × armored backplateMounting hardwareThermal pads

Supply your own G1/4 plugs for any unused ports.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Shut down the PC and remove the graphics card. Take off the stock cooler and clean the old thermal material from the contact areas.
2
Place thermal pads on the memory and voltage regulator contact areas. Apply your own thermal paste to the GPU die.
3
Align the water block, PCB, and backplate with the mounting holes. Fit the hardware and tighten the screws evenly in stages.
4
Connect the tubing to the side terminal. With the cold plate facing you and the terminal above it, use the right port as the inlet and the left port as the outlet.
5
Leak-test the loop before powering the graphics card.

You also need a pump, radiator, fittings, tubing, and coolant. The optional Bykski vertical GPU bracket shown in the manufacturer’s guide is sold separately.

FAQ

Will this fit my PNY RTX 4080 XLR8 Gaming VERTO?

Check for the EPIC-X RGB OC model with part number VCG408016TFXXPB1-O, then confirm the PCB layout against the block before ordering.

Does the water block have RGB lighting?

This water block has no built-in lighting. EPIC-X RGB identifies the graphics card’s factory lighting.

What does the block cool?

The full-cover cold plate cools the GPU core, graphics memory, and voltage regulators.

What else do I need to run the block?

Use it in a custom loop with a pump, radiator, fittings, tubing, and coolant.

Notes
  • Bykski reserves the right to upgrade/adjust the product, in case of upgrading to the appearance and structure, no further notice, the real object shall prevail.