Granzon · GBN-ST4090TQ
Full Armor water block for select ZOTAC RTX 4090 cards
The Granzon GBN-ST4090TQ is a full-cover GPU water block for select ZOTAC GeForce RTX 4090 cards, including the AMP Extreme AIRO (ZT-D40900B-10P). It replaces the stock air cooler and connects to a custom loop through side-mounted G1/4 ports. The nickel-plated copper cold plate cools the GPU core, memory, and voltage regulators.
Fits
Select ZOTAC RTX 4090 PCBs
Cold plate
Nickel-plated copper
Backplate
Passive aluminum
Compatibility
Fit is based on the ZOTAC board layouts listed below.
- ✓ZOTAC GAMING GeForce RTX 4090 AMP Extreme AIRO (ZT-D40900B-10P)
- ✓ZOTAC GAMING GeForce RTX 4090 Trinity OC (ZT-D40900J-10P)
- ✓ZOTAC GAMING GeForce RTX 4090 Trinity (ZT-D40900D-10P)
- ✓ZOTAC GAMING GeForce RTX 4090 Apocalypse
Before ordering, confirm your exact card model and verify its PCB layout.
ZOTAC RTX 4090 AMP Extreme AIRO PCB. Photo by TechPowerUp.
Design Highlights
Full-cover cold plate
The copper plate has raised contact areas for the GPU core, memory, and power delivery components.
0.3 mm microchannels
Coolant passes through the fine channels machined into the cold plate over the GPU.
Wraparound aluminum armor
The aluminum armor wraps around the board. The slotted backplate sits outside the coolant path, and a one-piece I/O bracket secures the assembly at the slot.
Key Specifications
| Model (SKU) | GBN-ST4090TQ |
|---|
| Cold plate | Nickel-plated copper |
|---|
| Armor and backplate | Aluminum alloy |
|---|
| Backplate type | Passive |
|---|
| Block dimensions (L × W × T) | 258.32 × 124.52 × 30.52 mm |
|---|
| Copper plate (L × W) | 222.5 × 118.7 mm |
|---|
| Microchannel width | 0.3 mm |
|---|
| I/O bracket thickness | 12 mm (aluminum alloy) |
|---|
| Port thread | G1/4, side-mounted inlet and outlet |
|---|
Manufacturer drawing. Dimensions are in millimeters.
Which Version Do I Need?
Use the full card name and PCB layout to choose among these Granzon Full Armor blocks.
Granzon GBN-ST4090TQTHIS PAGE
Choose this model for one of the ZOTAC RTX 4090 boards listed above.
Choose this model for a ZOTAC RTX 4080 AMP Extreme AIRO or RTX 4070 Ti 12GB AMP Extreme AIRO with a matching PCB.
Choose this model for the NVIDIA GeForce RTX 4090 Founders Edition PCB.
What's in the Box
1 × full-cover GPU water block1 × passive backplate1 × mounting hardware setThermal pads
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Shut down the system and remove the graphics card. Remove the stock cooler and backplate, then clean away old paste and pad residue.
2Place thermal pads at the contact points for your exact PCB. Apply a thin layer of your own thermal paste to the GPU die.
3Align the water block, PCB, and backplate. Tighten the mounting screws gradually and evenly.
4Connect the side inlet and outlet with G1/4 fittings. Supply your own G1/4 plugs for any unused ports.
5Fill and leak-test the loop with only the pump powered. Check the fittings and plugs before powering the card.
For the custom loop, supply a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings sized for your tubing. The optional Bykski vertical GPU mount is sold separately.
Manufacturer’s assembly illustration. Use the contact points for your exact PCB.
FAQ
Does this water block fit the ZOTAC RTX 4090 AMP Extreme AIRO?
Yes, for the ZT-D40900B-10P layout. Confirm your card's part number and PCB before ordering.
What materials are used in the block?
The cold plate is nickel-plated copper. The outer armor and backplate are aluminum alloy.
Does the backplate need a separate coolant connection?
The included backplate is passive and sits outside the coolant path.
Which fittings do I need?
Use G1/4 fittings for the side inlet and outlet, with the tubing connection sized for your tubing.
Notes- Bykski reserves the right to upgrade/adjust the product, in case of upgrading to the appearance and structure, no further notice, the real object shall prevail.