Granzon · G20
Open-frame PC case with a built-in distro plate
The Granzon G20 is an open-frame PC case for custom liquid cooling that fits E-ATX motherboards measuring 305 × 280 mm. Its acrylic motherboard tray doubles as a distribution plate, routing coolant through the chassis. The rear bracket mounts up to three 360 mm radiators, and the DDC pump is sold separately.
Radiator mounts
Up to 3 × 360 mm
Distro plate
Mitsubishi acrylic
Motherboard Compatibility
Check your board’s dimensions before ordering.
- ✓E-ATX · 305 × 280 mm
- ✓ATX · 305 × 244 mm
- ✓Micro-ATX · 244 × 244 mm
- ✓Mini-ITX · 170 × 170 mm
A Mini-ITX · B Micro-ATX · C ATX · D E-ATX
Design Highlights
The motherboard tray routes coolant
The acrylic tray integrates coolant channels and reservoir space into the frame. Connect your water blocks and radiators to the plate when you build the loop.
Granzon’s example build with separately supplied radiators and fans.
Three radiator mounts on the back
The G20 layout places up to three 360 mm radiators side by side. Granzon shows the GH360N slim radiator in this layout, with three 120 mm fans per radiator.
Cable routing and a replaceable power button
Route power cables through the chassis openings and behind the cable cover. The front of the frame has a replaceable mechanical power button.
Key Specifications
| Model | Granzon G20 |
|---|
| Chassis finish | Black |
|---|
| Distro plate material | Mitsubishi acrylic |
|---|
| Dimensions (H × W × D) | 535 × 485 × 373 mm |
|---|
| Net weight | 10.3 kg |
|---|
| Rear radiator mounts | Up to 3 × 360 mm |
|---|
| Pump mount | DDC |
|---|
| SSD mounts | 2 |
|---|
Granzon’s front and side dimensions in millimeters.
Which Version Do I Need?
Granzon G20THIS PAGE
Choose the freestanding G20 for a 305 × 280 mm E-ATX board or a build with up to three 360 mm radiators.
Choose the G10 for a desk-clamp setup with a Mini-ITX, Micro-ATX, or ATX board.
What's in the Box
1 × Granzon G20 chassis with integrated distro plate
Installation & Use
1Mount the motherboard to the chassis and secure the DDC pump to the distro plate at the position shown.
2Install the SSDs on the rear mounts. Fit the power supply in the lower bay and install the cable cover after routing the cables.
3Attach the fans to the radiators, then secure the assemblies to the G20 rear bracket.
4Fit the water blocks, then use tubing and fittings to connect the blocks, distro plate, and radiators. Fill the loop with coolant.
5Before turning on the PC, leak-test the loop with power supplied only to the pump.
Supply your own PC hardware, DDC pump, radiators, fans, water blocks, tubing, fittings, and coolant.
Granzon’s mounting diagram shows where the motherboard and pump attach.
FAQ
Will my E-ATX motherboard fit?
Check the board maker’s dimensions against the G20’s listed E-ATX size of 305 × 280 mm.
Which radiators does Granzon recommend?
Granzon shows a setup with three GH360N 360 mm radiators. Check the port positions when planning your tubing runs.
Does the G20 come with a pump?
The box contains the chassis with its integrated distro plate. Buy the DDC pump separately.
How much desk space does the G20 need?
The chassis measures 535 mm high, 485 mm wide, and 373 mm deep.
Notes- Other products in the detail picture, such as Motherboard, HDD/SSD, Graphics Card, CPU, Reservoir, Water Blocks, Tubes, Fittings, Radiators and other hardware, just for reference