Description
The Granzon GFM III is an add-on PWM DDC pump that circulates coolant in a custom PC water-cooling loop. It mounts to a compatible DDC housing, such as the Granzon GY-M radiator bridge. Its 2-inch display lets you check pump speed, voltage, load, and estimated flow at the pump.
The GFM III requires a compatible part with a DDC pump mount.
Check the model of your bridge, reservoir, or distro plate before ordering.
The screen shows live RPM, input voltage, pump load, and an estimated flow value based on speed. The dial changes color as the pump speeds up or slows down.
Adjust the speed in 100 RPM steps in manual mode, or use automatic mode to follow your motherboard’s PWM signal.
The GY-M bridge mounts the pump at the end of a supported Granzon GH-series radiator. The bridge and radiator are sold separately from the pump.
| Model | GFM III |
|---|---|
| Pump type | Add-on DDC |
| Pump core | CP-D3PB-X |
| Pump body (W × H × D) | 62.00 × 62.00 × 40.30 mm, excluding screw protrusion |
| Speed range | 1,800–4,800 RPM |
| Rated flow | 700 L/h |
| Rated head | 6 m |
| Power | 12 V DC via 4-pin Molex |
| Speed control | Wireless manual control or motherboard PWM |
| Display | 2 inches |
Choose based on what you already have in your loop.
Pair the pump with your own compatible bridge, reservoir, or distro plate.
You also need a compatible DDC mount, fittings and tubing for your loop, and PC coolant. For a radiator-mounted setup, use the GY-M bridge and a compatible GH-series radiator.
Yes. GFM 3.0 is the option label for the GFM III on this listing.
Yes. Connect the pump’s PWM lead to the motherboard and select automatic mode. The pump takes power from a separate 12 V DC, 4-pin Molex connection.
With a compatible remote, you can adjust the pump speed in 100 RPM steps.
The display estimates flow from pump speed. The accuracy of that estimate depends on the resistance of your loop.
Use the GY-M bridge to mount the pump to a Granzon GH120N, GH240N, GH360N, or GH480N radiator.