120mm Fan Modular Radiator, 30mm Class | Granzon GH120N/GH240N/GH360N/GH480N

Granzon · GH120N / GH240N / GH360N / GH480N

30 mm Class Modular Radiators for PC Water Cooling

These Granzon GH modular radiators cool liquid in a custom PC water cooling loop. Each model fits a row of 120 mm fans that move air through the copper core to carry heat away. Choose the size that matches your case’s radiator mount, then connect the radiator to a loop with a separate pump.

Fits
120 mm fans
Coolant ports
G1/4 thread
Core
Copper
Size class
120 / 240 / 360 / 480 mm

Fits

Choose the size class for your case’s radiator mount.

  • ✓GH120N supports one 120 mm fan per row.
  • ✓GH240N supports two 120 mm fans per row.
  • ✓GH360N supports three 120 mm fans per row.
  • ✓GH480N supports four 120 mm fans per row.

Check the space for the radiator, fans, fittings, and tubing together before ordering.

The documented Granzon G20 build uses three GH360N radiators.

Design Highlights

Modular end tanks

The acrylic end tanks sit at either end of the copper core. A separately sold GY-M bridge provides a mounting point for a compatible pump on the radiator.

Radiator fin stack

Coolant flows through the copper tubes. Air from the fans passes through the fins and carries heat out of the radiator.

G1/4 loop connections

Choose G1/4 fittings with a tube end that matches your tubing. Check fitting and tubing clearance where the radiator will sit in the case.

Key Specifications

120 mm classGH120N · 1 × 120 mm fan per row
240 mm classGH240N · 2 × 120 mm fans per row
360 mm classGH360N · 3 × 120 mm fans per row
480 mm classGH480N · 4 × 120 mm fans per row
Thickness class30 mm nominal
Nominal body width124.5 mm
MaterialsCopper core, acrylic end tanks
ColorBlack
Coolant port threadG1/4
Mounting threadM3
Coolant channels14
Fin density14 FPI
Factory pressure test value1.5 bar

Which Version Do I Need?

Choose by where you want the pump to sit in your loop.

Granzon GH radiatorTHIS PAGE
Choose this radiator if your loop uses a separate pump.
Add this bridge to mount a compatible pump at the end of a GH radiator. The pump is sold separately.
Choose the GZMN series if you want a radiator with an integrated pump.

What's in the Box

1 × radiator in the selected sizeMounting hardware

Installation & Use

1
Plan where the fans and radiator will sit. Allow room at the end tank for fittings and tubing.
2
Secure the radiator and fans with M3 hardware. Choose screws that extend no more than 5 mm past the fan toward the radiator.
3
Connect the radiator to the loop with G1/4 fittings and matching tubing.
4
Fill and leak-test the loop with the rest of the PC powered off.

Have 120 mm fans, a pump, G1/4 fittings, matching tubing, and coolant ready for the loop.

The left drawing shows screws reaching into the tube area. The right shows screws stopping above it.

FAQ

Which size works with three 120 mm fans?

Choose GH360N for three 120 mm fans in a row. Check that the case has a suitable 360 mm radiator mount and enough room for the installed fittings and fans.

Does the GH radiator come with a pump?

The GH box contains the radiator and mounting hardware. Supply a separate pump or choose the GZMN series for an integrated pump.

What fittings do I need?

Use G1/4 fittings at the radiator. Match the tube end of each fitting to your tubing.

Which screws should I use with slim fans?

For slim fans, select M3 screws for the installed fan thickness. The screw must extend no more than 5 mm beyond the fan toward the radiator.

Product Gallery

Notes
  • Check screw length at each mounting point. A screw that reaches a coolant tube can puncture it and cause a leak.