Granzon · GY-M
Mount a DDC pump directly to your GH radiator
The Granzon GY-M is a pump bridge for Granzon GH Series radiators such as the GH360N. It mounts a compatible DDC pump at the radiator end, freeing up the space a separate pump mount would need in a custom PC cooling loop. The bridge provides inlet, outlet, and fill ports for flexible tubing routes.
Use With
Check the radiator model on your part or its box before ordering.
- ✓Granzon GH120N
- ✓Granzon GH240N
- ✓Granzon GH360N
- ✓Granzon GH480N
Pump options include Bykski PMD3, Granzon GFM, and Granzon GFM III. Check that your pump can mount directly to the bridge and that the assembled unit leaves room for tubing and fittings.
Design Highlights
Manufacturer’s assembly illustration. Pump and radiator sold separately.
The pump sits at the radiator end
The bridge mounts flush to the radiator end tank. The pump sits on the bridge beside the port block, so you can plan the pump and radiator as one assembly.
A is the outlet. B and E are fill ports. C and D are inlets.
Choose the port that suits your tubing route
The inlets and fill ports are positioned on two faces. Use the side that keeps the return line and fill connection accessible in your case.
Key Specifications
| Model (SKU) | GY-M |
|---|
| Product type | Radiator pump bridge module |
|---|
| Main body | POM |
|---|
| Mounting point | GH series radiator end tank |
|---|
| External ports | 1 outlet, 2 inlets, 2 fill ports |
|---|
Manufacturer’s outline drawing of the bridge module.
Which Version Do I Need?
Choose the bridge, the matching parts, or a pump-and-radiator combo based on what you already have.
Granzon GY-M bridge moduleTHIS PAGE
Choose this to attach a compatible pump to a GH radiator you already have or plan to buy separately.
Choose a matching GH radiator if you’re assembling the pump and radiator from separate parts.
Pair this separately sold DDC pump with the GY-M if you still need a pump.
Choose the GZMN series if you want a radiator supplied with a pump.
What's in the Box
1 × Granzon GY-M bridge module
The pump and radiator are sold separately.
Installation & Use
1Check clearance for the bridge, pump, and fittings at the end of the radiator. If you’re adding the bridge to an existing loop, shut down the PC and drain the loop first.
2Align the bridge with the radiator end tank as shown. Seat the seals at the mating ports and secure the bridge with the appropriate hardware.
3Seat and secure the compatible pump on the bridge. Verify the required hardware against the installation instructions for your pump and radiator.
4Connect the return line to inlet C or D and the outgoing line to outlet A. Use B or E to fill the loop and seal the unused ports with stop plugs.
5Fill the loop with coolant and check it for leaks before powering the PC hardware.
Have a compatible pump and GH radiator ready, along with the matching fittings, tubing, stop plugs, coolant, and the other components for your loop.
A is the Bykski PMD3 pump. B is the GY-M bridge module. C is the GH radiator.
FAQ
Does the GH bridge come with a pump or radiator?
The box contains one GY-M bridge module. The pump and radiator are sold separately.
Which pump fits the Granzon GH bridge?
Use a Bykski PMD3, Granzon GFM, or Granzon GFM III with the GY-M bridge.
Which ports should I use for the return line and for filling?
Use C or D for the return line and B or E for filling. A is the outlet.
Notes- Not responsible for any damage caused by or when using this product. Please use at your own risk.