33%OFF

ATX/E-ATX GPU Anti-Sag Bracket – Lian Li GB-001, Black

$7.99 $12.00 now set
Quantity Price
1+ $7.99
2+ $7.75
items available
View Details
Lian Li · GB-001

GPU anti-sag support that mounts to the motherboard

The Lian Li GB-001 is a motherboard-mounted bracket that helps prevent a horizontal graphics card from sagging. The rail attaches at motherboard screw points, and an adjustable arm supports the underside of the card. Two support arms let you brace one or two cards, depending on your slot layout.

Fits
ATX and E-ATX
Mount
Motherboard screw points
Support
One or two graphics cards

Compatibility

Lian Li lists these motherboard form factors.

  • ✓ATX
  • ✓E-ATX

Before ordering, check the mounting holes next to your PCIe slots and look for clearance around the GPU fans and the motherboard chipset heatsink.

Key Specifications

ModelLian Li GB-001
ColorBlack
Mounting pointsMotherboard screw holes
Card orientationHorizontal
Support arms2, height-adjustable

Bracket and Mounting Details

What's in the Box

1 × mounting rail2 × support armsMounting hardware

Installation & Use

1
Locate the upper and lower motherboard mounting holes next to the PCIe slots, as shown in the GB-001 guide. Use standoffs with matching threads.
2
Fasten the rail to the standoffs and attach a support arm to a rail hole near the underside of the card.
3
Loosen the arm screw, adjust the arm until it supports the card without touching its fans, and tighten the screw.

FAQ

Can I use it with two graphics cards?

Yes. Position one arm under each horizontal card where the rail offers a usable mounting hole and there is clearance around the fans.

Where does the bracket attach?

The rail fastens to motherboard screw points next to the PCIe slots. The arms attach to the rail and adjust to the height of the cards.

Notes
  • Please allow slight dimension difference due to different manual measurement.