Multi-GPU Parallel Bridge Module, Barrow GJ8WS-01, G1/4

Barrow · GJ8WS-01

Parallel bridge for multi-GPU water cooling

The Barrow GJ8WS-01 is a parallel bridge module for custom liquid cooling loops with up to eight GPU water blocks. Tubing connects each water block to the module so the blocks can run in parallel. The black POM body measures 210 × 60 × 24 mm.

Capacity
Up to eight GPU branches
Fits
G1/4 fittings
Body
Black POM

Use With

  • ✓G1/4 fittings at the bridge module
  • ✓GPU water blocks connected to the module by tubing

Check that your build has room for the 210 × 60 × 24 mm module and its tubing.

Key Specifications

ModelGJ8WS-01
Flow layoutParallel
GPU capacityUp to eight water blocks
Port threadG1/4
Body materialPOM
ColorBlack
Body dimensions (L × W × H)210 × 60 × 24 mm

What's in the Box

1 × GJ8WS-01 parallel bridge module set

Installation & Use

1
Secure the module where you can route tubing to your water blocks.
2
Connect the water blocks to the module in parallel using tubing and G1/4 fittings at the module.
3
Seal unused water ports with G1/4 stop plugs.

FAQ

Can I use fewer than eight GPU water blocks?

Yes. Seal any unused water ports with G1/4 stop plugs.

Can I use quick-disconnect fittings?

Yes. Use fittings that match the module's G1/4 ports at the bridge connection.

Notes
  • In case of product appearance structure upgrade,without further notice,in kind prevail