Description
The Thermalright Extreme Odyssey is a silicone thermal pad that fills the gap between a heat-producing component and its heatsink. Use it at designated pad locations on graphics cards, memory modules, and SSDs. It is electrically nonconductive and has a manufacturer-rated thermal conductivity of 12.8 W/mK.
Thermalright lists these applications for Extreme Odyssey.
Before ordering, check the thickness and placement for each pad location in your device or cooler manual. A single heatsink can specify several pad thicknesses.
The pad compresses when the heatsink is mounted, maintaining contact between the component and the cooler when you use the specified thickness.
Use scissors to cut the pad to the length and width specified for each contact area. Choose the thickness before cutting.
| Model | Extreme Odyssey Thermal Pad |
|---|---|
| Thickness / store SKU | 1 mm (EOTP-1) 1.5 mm (EOTP-1.5) 2 mm (EOTP-2) |
| Material | Silicone |
| Thermal conductivity | 12.8 W/mK |
| Electrical conductivity | Nonconductive |
| Dielectric breakdown | 9.8 kV at 1 mm |
| Color | Gray |
| Density | 3.1 ± 0.2 g/cm³ |
| Hardness | 30–55 Sc |
| Pad properties | Noncorrosive and noncuring |
Check the required thickness and pad shape in your cooler’s instructions.
Have scissors and the tools specified for your heatsink on hand.
Use the thickness specified for the exact pad location on your device or cooler.
Thermalright specifies 12.8 W/mK for all three thicknesses offered here.
The pad is electrically nonconductive.
Yes. Use scissors to trim the sheet to the contact area before placing the pad.
This listing is for the original Extreme Odyssey thermal pad. Thermalright lists Extreme Odyssey II as a separate series.