Description
The Bykski CP-PARX-X-CT60 combines a PWM-controlled PARX pump and a clear tube reservoir for a custom PC water cooling loop. The reservoir holds coolant where you can see the level, and the pump circulates it through the loop. Choose a 100, 150, or 200 mm reservoir to suit the space in your case.
For custom PC water cooling loops with G1/4 fittings.
Match the voltage and pin layout before connecting the lighting. For either pump cover, check the assembled height against your available mounting space and leave room to access the reservoir cap.
The clear acrylic tube lets you check coolant level while filling the loop. The unlit version uses a black POM pump cover and the same clear tube design.
The LED strip sits in the acrylic pump cover and lights the base of the reservoir. Choose ARGB (RBW) or RGB to match your lighting connection.
The pump uses a ceramic shaft and a sine-wave drive. Set its speed through the PWM connection to suit your loop.
| Model | CP-PARX-X-CT60 |
|---|---|
| Pump core | Bykski CP-PARXPB-X, brushless DC |
| Reservoir material | Clear acrylic (PMMA) |
| Pump cover and housing | Clear PMMA or black POM cover, aluminum alloy outer housing |
| Port thread | G1/4 |
| Nominal reservoir lengths | 100, 150, or 200 mm |
| Overall height with PMMA cover | 164, 214, or 264 mm, respectively |
| Overall height with POM cover | 155, 205, or 255 mm, respectively |
| Diameter shown in top view | 78 mm for PMMA, 72 mm for POM |
| Width shown for 100 mm option | 83 mm for PMMA, 75.73 mm for POM |
| Pump voltage | 12 V DC |
| Speed control | 4-pin PWM, 1,800–3,000 RPM |
| Maximum flow | 330 L/h |
| Maximum head | 3 m |
| Lighting | Clear PMMA with 5V 3-pin ARGB (RBW) or 12V 4-pin RGB. Black POM has no lighting. |
Check whether you need a pump and reservoir together, a pump for a separate reservoir, or an accessory for your mounting position.
You also need G1/4 fittings sized for your tubing, tubing, coolant, and the other loop components, including a water block and radiator.
The assembly uses Bykski’s CP-PARXPB-X brushless DC pump core with PWM speed control.
It is 214 mm tall with the clear acrylic pump cover or 205 mm tall with the black POM pump cover.
Use a 5V 3-pin header for ARGB (RBW). The 12V 4-pin header is for the separate 12V RGB version.
Bykski recommends it for simple custom loops. The pump’s listed maximum flow is 330 L/h and its maximum head is 3 m.
Use G1/4 fittings that match the size and type of your tubing.